{"data":{"id":"us-ar/ark.-code-ann.-20-27-903","jurisdiction":"us-ar","citation":"Ark. Code Ann. § 20-27-903","heading":"Labeling required","body":"(a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation. (b) Safety glazing labeling shall not be used on other than safety glazing materials. Acts 1973, No. 117, § 2; A.S.A. 1947, § 82-733.\n\n(a) (1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material. (2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972. (3) The label shall be legible and visible after installation.\n\n(1) Each light of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations or installed in a hazardous location within this state shall be labeled as such by etching, sand blasting, firing of ceramic material, or pressure sensitive labels on the safety glazing material.\n\n(2) The label shall identify the labeler, whether manufacturer, fabricator, or installer, the thickness and type of safety glazing material, and the fact that the material meets the test requirements of American National Standards Institute Standard Z-97.1 - 1972.\n\n(3) The label shall be legible and visible after installation.\n\n(b) Safety glazing labeling shall not be used on other than safety glazing materials.","path":["AR Code","Title 20","Chapter 27","Subchapter 9"],"source_url":"https://oss-data-us.vaquill.ai/v2026.08/us_ar_statutes.parquet","current_through":"2026-08-14","vintage":"open-us-law v2026.08, retrieved 2026-09-14","retrieved_at":"2026-09-14T18:32:41Z","sha256":"a23b6cfefd1fa62177362acd90210a2717506acdbc4577dee079ce04b1b01fcb","source_id":"us-ar","stale":false,"prev":"us-ar/ark.-code-ann.-20-27-902","next":"us-ar/ark.-code-ann.-20-27-904"},"notice":"GroundRules: Original legal text. Not legal advice."}