{"data":{"id":"us-ca/bpc-25510","jurisdiction":"us-ca","citation":"BPC § 25510","heading":"","body":"Notwithstanding any other provision of this chapter, a manufacturer may furnish to a licensed wholesaler, and a licensed wholesaler or manufacturer may furnish to an on-sale licensee, only the following specified items of alcoholic beverage tapping equipment: kegs, tapping heads, air lines, alcoholic beverage lines, clamps, washers, coupling devices, rods, vents, valves, keg spacers, and filters for an initial installation in a new on-sale licensed account or for a changeover of equipment from one tapping system to another. A supplier may service, repair, and replace the above-specified items of alcoholic beverage tapping equipment as necessary. This section shall not permit a supplier to furnish or repair alcoholic beverage equipment not specified in this section to an on-sale licensee. Alcoholic beverage tapping equipment furnished by a supplier shall remain the property of the supplier.","path":["Business and Professions Code - BPC","DIVISION 9. ALCOHOLIC BEVERAGES [23000. - 25762.]","CHAPTER 15. Tied-House Restrictions [25500. - 25512.]"],"source_url":"https://downloads.leginfo.legislature.ca.gov/pubinfo_2025.zip","current_through":"2026-09-13","vintage":"","retrieved_at":"2026-09-14T05:56:33Z","sha256":"67acae1d7bee645e51e42e257b57db2becc7759a9437ee0a50fbda4af3ffae30","source_id":"us-ca","stale":false,"prev":"us-ca/bpc-25509.1","next":"us-ca/bpc-25511"},"notice":"GroundRules: Original legal text. Not legal advice."}