{"data":{"id":"us-co/c.r.s.-18-12-303","jurisdiction":"us-co","citation":"C.R.S. § 18-12-303","heading":"Identification markings for large-capacity magazines - rules.","body":"(1) A large-capacity magazine that is manufactured in Colorado on or after July 1, 2013, must include a permanent stamp or marking indicating that the large-capacity magazine was manufactured or assembled after July 1, 2013. The stamp or marking must be legibly and conspicuously engraved or cast upon the outer surface of the large-capacity magazine.\n\n(2) The bureau may promulgate such rules as may be necessary for the implementation of this section, including but not limited to rules requiring a large-capacity magazine that is manufactured on or after July 1, 2013, to bear identifying information in addition to the identifying information described in subsection (1) of this section.\n\n(3) A person who manufactures a large-capacity magazine in Colorado in violation of subsection (1) of this section commits a class 2 misdemeanor and shall be punished in accordance with section 18-1.3-501.","path":["Title 18 - CRIMINAL CODE","Article 12 - Offenses Relating to Firearms and Weapons","Part 3 - LARGE-CAPACITY AMMUNITION MAGAZINES"],"source_url":"https://olls.info/crs/crs2026-title-18.htm","current_through":"Colorado Revised Statutes 2026","vintage":"","retrieved_at":"2026-09-14T18:37:45Z","sha256":"1625e971c391ba3b25214401e5395fc2b5282736ec8a9e509829523ec299c610","source_id":"us-co","stale":false,"prev":"us-co/c.r.s.-18-12-302","next":"us-co/c.r.s.-18-12-401"},"notice":"GroundRules: Original legal text. Not legal advice."}