{"data":{"id":"us-ct/conn.-gen.-stat.-15-136a","jurisdiction":"us-ct","citation":"Conn. Gen. Stat. § 15-136a","heading":"Compliance with certain engine size requirements.","body":"In complying with the requirements of any statute, regulation or ordinance restricting the horsepower or size of the engine on any vessel while being operated on an inland body of water, a person may (1) in the case of an outboard motor, remove the propeller from the boat's engine and incline the engine out of the water so that the absence of the propeller is clearly visible, or (2) in the case of an inboard motor, remove the propeller from the boat's engine and incline or trim the engine to an upright position. This section shall not be construed to allow vessels with the gasoline-powered engines on bodies of water where such engines are not allowed.","path":["TITLE 15. NAVIGATION AND AERONAUTICS","CHAPTER 268. BOATING","PART II. SAFETY REGULATION"],"source_url":"https://www.cga.ct.gov/current/pub/chap_268.htm#sec_15-136a","current_through":"Revised to January 1, 2026 (2026 Supplement to the General Statutes of Connecticut, applied over the base revision of January 1, 2025)","vintage":"","retrieved_at":"2026-09-06T19:07:01Z","sha256":"506fbcc1670c11e1c9216bf3a03c324fe7f05add8f738253d640869265f6743f","source_id":"us-ct","stale":false,"prev":"us-ct/conn.-gen.-stat.-15-136","next":"us-ct/conn.-gen.-stat.-15-137"},"notice":"GroundRules: Original legal text. Not legal advice."}