{"data":{"id":"us-ct/conn.-gen.-stat.-22a-354b","jurisdiction":"us-ct","citation":"Conn. Gen. Stat. § 22a-354b","heading":"Standards for modeling and mapping of locations of aquifers.","body":"The Commissioner of Energy and Environmental Protection shall establish standards for two levels of modeling and mapping of the location in aquifers of well field areas, zones of contribution and recharge areas. Standards for mapping at level A shall be established by regulations adopted by the commissioner in accordance with the provisions of chapter 54, except that notice of intent to adopt such regulations shall be published on or before July 1, 1990, and shall be based on hydrogeological data of aquifer geometry, hydraulic characteristics and connection to surface water features, groundwater level data and surface water discharge information for model calibration and pump test data for model verification. Standards for mapping at level B shall be established by guidelines developed by the commissioner and shall be based on existing geologic mapping of known aquifer characteristics, limited field verification, the location of existing and potential well fields and pumping rates.","path":["TITLE 22a. ENVIRONMENTAL PROTECTION","CHAPTER 446i*. WATER RESOURCES. INVASIVE PLANTS","PART I. GENERAL PROVISIONS"],"source_url":"https://www.cga.ct.gov/current/pub/chap_446i.htm#sec_22a-354b","current_through":"Revised to January 1, 2026 (2026 Supplement to the General Statutes of Connecticut, applied over the base revision of January 1, 2025)","vintage":"","retrieved_at":"2026-09-06T19:07:07Z","sha256":"e3119b34ae2a3be9d6abf81d6b2d5f4700b33485c6c882041a05e18edbb70e04","source_id":"us-ct","stale":false,"prev":"us-ct/conn.-gen.-stat.-22a-354a","next":"us-ct/conn.-gen.-stat.-22a-354c"},"notice":"GroundRules: Original legal text. Not legal advice."}
