{"data":{"id":"us-ga/o.c.g.a.-40-6-302","jurisdiction":"us-ga","citation":"O.C.G.A. § 40-6-302","heading":"Labeling of bicycles; required equipment.","body":"(a) Any electric assisted bicycle manufactured on and after January 1, 2020, shall be equipped with a permanently affixed label in a prominent location which identifies such device as a class I, II, or III electric assisted bicycle along with the motor wattage and top assisted speed capability. Such label shall be printed in at least 9 point Arial font.\n(b) The requirements set forth in subsection (a) of this Code section shall apply to a manufacturer, distributor, and any person who alters an electric assisted bicycle in a manner that changes the class by which the electric assisted bicycle is identified.\n(c) Any electric assisted bicycle shall have the same equipment required for bicycles as set forth in Part 1 of this article; provided however, that such devices shall be capable of disengaging the motor when the operator stops pedaling or applies the brakes.\n(d) Any class III electric assisted bicycle shall be equipped with a speedometer that is capable of displaying the speed the device is traveling measured in miles per hour.","path":["TITLE 40 Motor Vehicles and Traffic","CHAPTER 6 Uniform Rules of the Road","Article 13 Special Provisions for Certain Vehicles","PART 1A Electric Assisted Bicycles"],"source_url":"https://archive.org/download/gov.ga.ocga.2018/release86.2022.11/gov.ga.ocga.title.40.odt","current_through":"Release 86 (2022-11)","vintage":"Public.Resource.Org bulk O.C.G.A., Release 86 (2022-11), retrieved 2026-09-17","retrieved_at":"2026-09-17T19:34:57Z","sha256":"80c40ea1108ac53c2561b339112aae3b19ae0b23573a2308bcdbd9b0e70510c1","source_id":"us-ga","stale":false,"prev":"us-ga/o.c.g.a.-40-6-301","next":"us-ga/o.c.g.a.-40-6-303"},"notice":"GroundRules: Original legal text. Not legal advice."}