{"data":{"id":"us-mi/mich.-comp.-laws-324.16102","jurisdiction":"us-mi","citation":"Mich. Comp. Laws § 324.16102","heading":"Plastic products; labeling with code; list of label codes; copies of list.","body":"Sec. 16102.\n\nAll plastic products sold in this state shall be labeled with a code indicating the plastic resin used to produce the product. The code shall consist of a number placed within a triangle of arrows with letters placed below the triangle of arrows. The triangle shall be equilateral, formed by 3 arrows with the apex of each point of the triangle at the midpoint of each arrow, rounded with a short radius. The pointer or arrowhead of each arrow shall be at the midpoint of each side of the triangle with a short gap separating the pointer from the base of the adjacent arrow. The triangle, formed by the 3 arrows curved at their midpoints shall depict a clockwise path around the code number. The triangle of arrows shall be not less than 1/2 inch high or if the plastic product is designed so that a triangle or arrows of not less than 1/2 inch height cannot be added to the product, a smaller label may be used if the label can be easily read. The code shall appear on or near the bottom of the plastic product as follows:\n\n1 PETE.\n\n2 HDPE.\n\n3 V.\n\n4 LDPE.\n\n5 PP.\n\n6 PS.\n\n7 OTHER.\n\n8 D.\n\nThe department shall maintain a list of the label codes provided in subsection (1) and shall provide a copy of that list to any person upon request.","path":["MI Code","Chapter 324","Act Act-451-of-1994"],"source_url":"https://www.legislature.mi.gov/Laws/MCL?objectName=mcl-324-16102","current_through":"2026-08-14","vintage":"open-us-law v2026.08, retrieved 2026-09-14","retrieved_at":"2026-09-14T18:32:31Z","sha256":"c8218216744b7dc0d8050e428c0c15f0266fbca5612dcee4cf3c049a3de9aa55","source_id":"us-mi","stale":false,"prev":"us-mi/mich.-comp.-laws-324.16101","next":"us-mi/mich.-comp.-laws-324.16103"},"notice":"GroundRules: Original legal text. Not legal advice."}