{"data":{"id":"us-mt/61-8-211","jurisdiction":"us-mt","citation":"61-8-211","heading":"Lane use control signals.","body":"When lane use control signals are placed over individual lanes, the signals indicate and apply to operators of vehicles as follows:\n(1) An operator of a vehicle may drive in the lane over which a steady downward green arrow signal is located.\n(2) An operator of a vehicle must be prepared to vacate, in a safe manner, the lane over which a steady yellow X signal is located because a lane control change is being made to a steady red X signal.\n(3) An operator of a vehicle may not use the lane over which the steady red X signal is located.\n(4) An operator of a vehicle may use a lane over which a steady white two-way left-turn arrow signal is located for a left turn but not for through travel. The operator must be aware that common use of the lane by oncoming vehicular traffic is also permitted.\n(5) An operator of a vehicle may use a lane over which a steady white one-way left-turn arrow signal is located for a left turn but not for through travel.","path":["TITLE 61. MOTOR VEHICLES","CHAPTER 8. TRAFFIC REGULATION","Part 2. Traffic Control Devices"],"source_url":"https://mca.legmt.gov/bills/mca/title_0610/chapter_0080/part_0020/section_0110/0610-0080-0020-0110.html","current_through":"Montana Code Annotated 2025","vintage":"","retrieved_at":"2026-09-14T04:57:53Z","sha256":"4d30d3364f7cf9e8e5b8927d4c926267ba7d9dd11cdf14e2580dd03651c68414","source_id":"us-mt","stale":false,"prev":"us-mt/61-8-210","next":"us-mt/61-8-212"},"notice":"GroundRules: Original legal text. Not legal advice."}