{"data":{"id":"us-nd/n.d.-cent.-code-39-27-05","jurisdiction":"us-nd","citation":"N.D. Cent. Code § 39-27-05","heading":"Tires, wheels, and rims","body":"1.Motorcycle tires must be of pneumatic design with a minimum width of two and twenty-five hundredths inches [57.15 millimeters] designed for highway use.\n2.Tires on two-wheel motorcycles and the single tire on the front or rear of a three-wheel motorcycle must have a load capacity rating at least equal to their respective gross axle weight ratings. Each tire on the front or rear axle of a three-wheel motorcycle must have a load capacity rating at least equal to one-half the front or rear axle gross axle weight rating.\n3.Wheel rim diameters may not be less than ten inches [25.4 centimeters] or otherwise comply with title 49, Code of Federal Regulations, part 571, Federal Motor Vehicle Safety Standards, and must otherwise comply with applicable state standards, as promulgated by the director. Two-wheel motorcycles using low pressure tires are exempt from this subsection if the inflated height of the tire is twenty inches [508 millimeters] or greater.","path":["Title 39 Motor Vehicles","Chapter 39-27 Motorcycle Equipment"],"source_url":"https://ndlegis.gov/cencode/t39c27.pdf","current_through":"2026-07-31T11:12:02","vintage":"","retrieved_at":"2026-09-02T21:04:14Z","sha256":"d93490b090ddd019d6dab1d6a60c4d2ae512caa81adc0905164a48faa9b702a2","source_id":"us-nd","stale":false,"prev":"us-nd/n.d.-cent.-code-39-27-04.1","next":"us-nd/n.d.-cent.-code-39-27-06"},"notice":"GroundRules: Original legal text. Not legal advice."}