{"data":{"id":"us-ne/neb.-rev.-stat.-89-187.03","jurisdiction":"us-ne","citation":"Neb. Rev. Stat. § 89-187.03","heading":"Permit; placed-in-service report or inspection; denial of permit; procedure.","body":"Before issuing a permit to operate a weighing and measuring establishment, the director shall receive a placed-in-service report from a repairperson, who is registered with the department, or inspect each weighing and measuring device to determine whether the applicant qualifies to hold a permit pursuant to subsection (1) of section 89-187.07 except when the requirements of section 89-187.04 have been met. A placed-in-service report shall be in the form prescribed by the department. A weighing and measuring establishment receiving a placed-in-service report for all of its weighing and measuring devices, passing inspection by the department, or meeting the requirements of section 89-187.04 and otherwise found to qualify to hold a permit pursuant to subsection (1) of section 89-187.07 shall be issued a permit. An applicant who does not receive a permit shall be notified in writing of the grounds for denial, and such applicant shall be afforded the opportunity of a hearing to present evidence that the establishment is qualified to hold a permit pursuant to subsection (1) of section 89-187.07 and should be issued a permit. All such hearings shall be in compliance with the Administrative Procedure Act.","path":["Chapter 89 - WEIGHTS AND MEASURES"],"source_url":"https://nebraskalegislature.gov/laws/statutes.php?statute=89-187.03","current_through":"Laws 2026","vintage":"","retrieved_at":"2026-09-17T21:01:11Z","sha256":"0fa5f01e97d2134353af4eced0b8b1848e06c086dda83ad4353309e5f558faf4","source_id":"us-ne","stale":true,"prev":"us-ne/neb.-rev.-stat.-89-187.02","next":"us-ne/neb.-rev.-stat.-89-187.04"},"notice":"GroundRules: Original legal text. Not legal advice."}