{"data":{"id":"us-ut/utah-code-15a-6-201","jurisdiction":"us-ut","citation":"Utah Code § 15A-6-201","heading":"Polyurethane insulated concrete forms.","body":"(1) Notwithstanding any other provision of this title, a governing body in the state that issues a building permit may not:\n(a) deny issuing a building permit to a project solely because the project uses polyurethane insulated concrete form block that complies with Subsection (2); or\n(b) require a project to surface flame retardants on polyurethane insulated concrete form block that has a flame spread that is less than or equal to 25.\n(2) A project may use polyurethane insulated concrete form block if:\n(a) the polyurethane insulated concrete form block is manufactured using expanded polyurethane foam that:\n(i) has a flame spread index that is less than or equal to 50;\n(ii) has a smoke index that is less than 350; and\n(iii) is capable of withstanding fluid pressure created by fresh concrete; and\n(b) the project is designed and stamped by a structural engineer licensed in the state.","path":["Title 15A State Construction and Fire Codes Act","Chapter 15A-6 Additional Construction Requirements","Part 15A-6-2 Insulated Concrete Forms"],"source_url":"https://le.utah.gov/xcode/Title15A/Chapter6/15A-6-S201.html","current_through":"2026 General Session","vintage":"","retrieved_at":"2026-09-03T11:34:33Z","sha256":"113a03093c48f91162a6f241a57c46b309bbc3be88d4143157784f8861416ffc","source_id":"us-ut","stale":false,"prev":"us-ut/utah-code-15a-6-102","next":"us-ut/utah-code-15a-6-202"},"notice":"GroundRules: Original legal text. Not legal advice."}