{"data":{"id":"us-va/18vac145-40-60","jurisdiction":"us-va","citation":"18VAC145-40-60","heading":"Use of seal","body":"A certified professional geologist may apply a rubber stamp or preprinted seal to final and complete cover sheets and to each original sheet of plans or drawings prepared or reviewed and approved by the regulant. The seal may be applied to the cover sheet of technical reports and specifications prepared or reviewed and approved by the regulant.\n\n1. All seal imprints on final documents must be signed.\n\n2. Application of the seal and signature indicates acceptance of responsibility for work shown thereon.\n\n3. The original seal must be two inches in diameter and conform to the design illustrated in this subdivision.\n\n*The number on the seal is the last four digits of the certificate number.","path":["Title 18. Professional And Occupational Licensing","Agency 145. Board For Professional Soil Scientists, Wetland Professionals, And Geologists","Chapter 40. Regulations for the Geology Certification Program","Part I. General"],"source_url":"https://law.lis.virginia.gov/admincode/title18/agency145/chapter40/section60/","current_through":"2026 Regular Session (effective July 1, 2026)","vintage":"","retrieved_at":"2026-09-14T04:53:14Z","sha256":"afd727c57899eee86ce62947421b0485af09b7aa17bd56f35d6634a1d6591d53","source_id":"us-va-vac","stale":false,"prev":"us-va/18vac145-40-50","next":"us-va/18vac145-40-70"},"notice":"GroundRules: Original legal text. Not legal advice."}