{"data":{"id":"us-va/9vac5-40-3890","jurisdiction":"us-va","citation":"9VAC5-40-3890","heading":"Control technology guidelines","body":"A. Prime application. The control technology should consist of one or more of the following:\n\n1. Use of electrodeposited waterborne coatings.\n\n2. Use of other waterborne coatings.\n\n3. Use of lower solvent (higher solids) organic solvent-borne systems.\n\n4. Carbon adsorption.\n\n5. Incineration.\n\n6. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 A 1, provided such technology is approved by the board.\n\nB. Guidecoat application. The control technology should consist of one or more of the following:\n\n1. Use of waterborne coatings;\n\n2. Use of lower solvent (higher solids) organic solvent-borne systems;\n\n3. Carbon adsorption; and\n\n4. Incineration; or\n\n5. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 B 1, provided such technology is approved by the board.\n\nC. Topcoat application. The control technology should consist of one or more of the following:\n\n1. Use of waterborne coatings;\n\n2. Use of lower solvent (higher solids) organic solvent-borne systems;\n\n3. Carbon adsorption; and\n\n4. Incineration; or\n\n5. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 C 1, provided such technology is approved by the board.\n\nD. Final repair application. The control technology should consist of one or more of the following:\n\n1. Use of lower solvent (higher solids) organic solvent borne systems;\n\n2. Carbon adsorption; and\n\n3. Incineration; or\n\n4. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 D 1, provided such technology is approved by the board.\n\nE. Anti-chip coating application. The control technology should consist of one or more of the following:\n\n1. Use of electrodeposited waterborne coatings;\n\n2. Use of other waterborne coatings;\n\n3. Use of high solids coatings;\n\n4. Use of powder coatings;\n\n5. Carbon adsorption; and\n\n6. Incineration; or\n\n7. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 E 1, provided such technology is approved by the board.","path":["Title 9. Environment","Agency 5. State Air Pollution Control Board","Chapter 40. Existing Stationary Sources","Part II. Emission Standards","Article 28. Emission Standards for Automobile and Light Duty Truck Coating Application Systems (Rule 4-28)"],"source_url":"https://law.lis.virginia.gov/admincode/title9/agency5/chapter40/section3890/","current_through":"2026 Regular Session (effective July 1, 2026)","vintage":"","retrieved_at":"2026-09-14T04:48:10Z","sha256":"c9b190825e0658e13eea841c15e0db8352822da288696899ff678d217234970f","source_id":"us-va-vac","stale":false,"prev":"us-va/9vac5-40-3880","next":"us-va/9vac5-40-3900"},"notice":"GroundRules: Original legal text. Not legal advice."}