{"data":{"id":"us/14-cfr-21.145","jurisdiction":"us","citation":"14 CFR 21.145","heading":"Privileges.","body":"(a) The holder of a production certificate may—\n(1) Obtain an aircraft airworthiness certificate without further showing, except that the FAA may inspect the aircraft for conformity with the type design; or\n(2) In the case of other products, obtain approval from the FAA for installation on type-certificated aircraft.\n(b) Notwithstanding the provisions of § 147.3 of this chapter, the holder of a production certificate for a primary category aircraft, or for a normal, utility, or acrobatic category aircraft of a type design that is eligible for a special airworthiness certificate in the primary category under § 21.184(c), may—\n(1) Conduct training for persons in the performance of a special inspection and preventive maintenance program approved as a part of the aircraft's type design under § 21.24(b), provided a person holding a mechanic certificate with appropriate airframe and powerplant ratings issued under part 65 of this chapter gives the training; and\n(2) Issue a certificate of competency to persons successfully completing the approved training program, provided the certificate specifies the aircraft make and model to which the certificate applies.","path":["Title 14—Aeronautics and Space","CHAPTER I—FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION","SUBCHAPTER C—AIRCRAFT","PART 21—CERTIFICATION PROCEDURES FOR PRODUCTS AND ARTICLES","Subpart G—Production Certificates"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-14.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:20Z","sha256":"59406eef50f3ec184ade5826f7ab3f3581d8a07b356992672e43e696d424ee4a","source_id":"us-cfr","stale":true,"prev":"us/14-cfr-21.144","next":"us/14-cfr-21.146"},"notice":"GroundRules: Original legal text. Not legal advice."}