{"data":{"id":"us/21-cfr-175.105","jurisdiction":"us","citation":"21 CFR 175.105","heading":"Adhesives.","body":"(a) Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions:\n(1) The adhesive is prepared from one or more of the optional substances named in paragraph (c) of this section, subject to any prescribed limitations.\n(2) The adhesive is either separated from the food by a functional barrier or used subject to the following additional limitations:\n(i) In dry foods. The quantity of adhesive that contacts packaged dry food shall not exceed the limits of good manufacturing practice.\n(ii) In fatty and aqueous foods. (a) The quantity of adhesive that contacts packaged fatty and aqueous foods shall not exceed the trace amount at seams and at the edge exposure between packaging laminates that may occur within the limits of good manufacturing practice.\n(b) Under normal conditions of use the packaging seams or laminates will remain firmly bonded without visible separation.\n(b) To assure safe usage of adhesives, the label of the finished adhesive container shall bear the statement “food-packaging adhesive”.\n(c) Subject to any limitation prescribed in this section and in any other regulation promulgated under section 409 of the Act which prescribes safe conditions of use for substances that may be employed as constituents of adhesives, the optional substances used in the formulation of adhesives may include the following:\n(1) Substances generally recognized as safe for use in food or food packaging.\n(2) Substances permitted for use in adhesives by prior sanction or approval and employed under the specific conditions of use prescribed by such sanction or approval.\n(3) Flavoring substances permitted for use in food by regulations in this part, provided that such flavoring substances are volatilized from the adhesives during the packaging fabrication process.\n(4) Color additives approved for use in food.\n(5) Substances permitted for use in adhesives by other regulations in this subchapter and substances named in this subparagraph: Provided, however, That any substance named in this paragraph and covered by a specific regulation in this subchapter, must meet any specifications in such regulation.\nSubstances Limitations\nAbietic acid\nAcetone\nAcetone-formaldehyde condensate (CAS Reg. No. 25619-09-4)\nAcetone-urea-formaldehyde resin\nN-Acetyl ethanolamine\nAcetyl tributyl citrate\nAcetyl triethyl citrate\n2-Acrylamido-2-methyl-propanesulfonic acid, homopolymer, sodium salt (CAS Reg. No. 35641-59-9)\nAlbumin, blood\n(2-Alkenyl) succinic anhydrides in which the alkenyl groups are derived from olefins which contain not less than 78 percent C30 and higher groups (CAS Reg. No. 70983-55-0)\n4-[2-[2-2-(Alkoxy (C12-C15) ethoxy) ethoxy]ethyl] disodium sulfosuccinate\n1-Alkyl (C6-C18) amino-3-amino-propane monoacetate\nAlkylated (C4 and/or C8) phenols\nAlkyl (C7-C12) benzene\nAlkyl (C10-C20) dimethylbenzyl ammonium chloride\nn-Alkyl(C12, C14, C16, or C18) dimethyl (ethylbenzyl) ammonium cyclohexylsulfamate For use as preservative only.\nAlkyl ketene dimers as described in § 176.120 of this chapter\nAlkyl (C7-C12) naphthalene\nalpha Olefin sulfonate [alkyl group is in the range of C10-C18 with not less than 50 percent C14-C16], ammonium, calcium, magnesium, potassium, and sodium salts\n2-[(2-aminoethyl)amino]ethanol (CAS Reg. No. 111-41-1)\n3-Aminopropanediol For use only in the preparation of polyurethane resins.\nAluminum\nAluminum acetate\nAluminum di(2-ethylhexoate)\nAluminum potassium silicate\nN-β-Aminoethyl-gamma-aminopropyl trimethoxysilane\n3-(Aminomethyl)-3,5,5-trimethylcyclohexylamine\nAminomethylpropanol\nAmmonium benzoate For use as preservative only.\nAmmonium bifluoride For use only as bonding agent for aluminum foil, stabilizer or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.\nAmmonium borate\nAmmonium citrate\nAmmonium persulfate\nAmmonium polyacrylate\nAmmonium potassium hydrogen phosphate\nAmmonium silico-fluoride For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.\nAmmonium sulfamate\nAmmonium thiocyanate\nAmmonium thiosulfate\nAmyl acetate\nAnhydroenneaheptitol\nAnimal glue as described in § 178.3120 of this chapter\n2-Anthraquinone sulfonic acid, sodium salt For use only as polymerization-control agent.\nAntimony oxide\nAsbestos\nAsphalt, paraffinic and naphthenic\nAzelaic acid\nAzo-bis-isobutyronitrile\nBalata rubber\nBarium acetate\nBarium peroxide\nBarium sulfate\nBentonite\nBenzene (benzol)\n1,4-Benzenedicarboxylic acid, bis[2-(1,1-dimethylethyl)-6-[[3-(1,1-dimethylethyl)-2-hydroxy-5-methylphenyl]methyl]-4-methyl-phenyl]ester (CAS Reg. No. 57569-40-1) For use as a stabilizer.\n1,2-Benzisothiazolin-3-one (CAS Registry No. 2634-33-5) For use as preservative only.\nBenzothiazyldisulfide\np-Benzoxyphenol For use as preservative only.\nBenzoyl peroxide\nBenzyl alcohol\nBenzyl benzoate\nBenzyl bromoacetate For use as preservative only.\np-Benzyloxyphenol Do.\nBHA (butylated hydroxyanisole)\nBHT (butylated hydroxytoluene)\nBicyclo[2.2.1]hept-2-ene-6-methyl acrylate\n2-Biphenyl diphenyl phosphate\nBis(benzoate-O)(2-propanolato)aluminum (CAS Reg. No. 105442-85-1) For use only as a reactant in the preparation of polyester resins.\n1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hy-drazine (CAS Reg. No. 32687-78-8) For use at a level not to exceed 2 percent by weight of the adhesive.\n1,3-Bis(2-benzothiazolylmercaptomethyl) urea\n4,4′-Bis(α,α-dimethylbenzyl)diphenylamine\n2,6-Bis(1,1-dimethylethyl)-4-(1-methylpropyl)phenol (CAS Reg. No. 17540-75-9) For use as an antioxidant and/or stabilizer only.\n2,6-Bis (1-methylheptadecyl)-p-cresol\n4-[[4, 6-Bis(octylthio)6-Bis(octylthio)6-Bis(octylthio)-s-triazin-2-yl]amino]-2,6-di-tert-butylphenol (CAS Reg. No. 991-84-4)\nBis(tri-n-butyltin) oxide For use as preservative only.\nBis(trichloromethyl)sulfone C.A. Registry No. 3064-70-8 Do.\nBorax\nBoric acid\n2-Bromo-2-nitro-1, 3-propanediol (CAS Reg. No. 52-51-7) For use only as an antibacterial preservative.\nButanedioic acid, sulfo-1,4-di-(C9-C11 alkyl) ester, ammonium salt (also known as butanedioic acid, sulfo-1,4-diisodecyl ester, ammonium salt [CAS Reg. No. 144093-88-9]). For use as a surface active agent in adhesives.\n1,3-Butanediol\n1,4-Butanediol\n1,4-Butanediol modified with adipic acid\nButoxy polyethylene polyproplyene glycol (molecular weight 900-4,200)\nButyl acetate\nButyl acetyl ricinoleate\nButyl alcohol\nButylated reaction product of p-cresol and dicyclopentadiene As identified in § 178.2010(b) of this chapter.\nButylated, styrenated cresols identified in § 178.2010(b) of this chapter\nButyl benzoate\n1,3-Butylene glycoldiglycolic acid copolymer\ntert-Butyl hydroperoxide\n4,4′-Butylidenebis(6-tert-butyl-m-cresol)\nButyl lactate\np-tert-Butylphenyl salicylate\np-tert-Butylpyrocatechol For use only as polymerization-control agent.\nButyl ricinoleate\nButyl rubber polymer\nButyl stearate\nButyl titanate, polymerized\nButyraldehyde\nCalcium ethyl acetoacetate\nCalcium nitrate\nCalcium metasilicate\nCamphor\nCamphor fatty acid esters\nCandelilla wax\nepsilon-Caprolactam-(ethylene-ethyl acrylate) graft polymer\nCarbon black, channel process\nCarbon disulfide-1,1′-methylenedipiperidine reaction product\nCarbon tetrachloride\nCarboxymethylcellulose\nCastor oil, polyoxyethylated (4-84 moles ethylene oxide)\nCellulose acetate butyrate\nCellulose acetate propionate\nCeresin wax (ozocerite)\nCetyl alcohol\nChloracetamide\nChloral hydrate\nChlorinated liquid n-paraffins with chain lengths of C10-C17, containing 40-70 percent chlorine by weight\nChlorinated pyridine mixture with active ingredients consisting of 2,3,5,6-tetrachloro-4-(methylsulfonyl) pyridine, 2,3,5,6-tetrachloro-4-(methylsulfinyl) pyridine and pentachloropyridine For use as preservative only.\nChlorinated rubber polymer (natural rubber polymer containing approximately 67 percent chlorine)\n1-(3-Chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride For use as preservative only.\nChlorobenzene\n4-Chloro-3,5-dimethylphenol (p-chloro-m-xylenol) For use as preservative only.\n4-Chloro-3-methylphenol Do.\n5-Chloro-2-methyl-4-isothiazolin-3-one (CAS Reg. No. 26172-55-4) and 2-methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4) mixture at a ratio of 3 parts to 1 part, manufactured from methyl-3-mercaptopropionate (CAS Reg. No. 2935-90-2). The mixture may contain magnesium nitrate (CAS Reg. No. 10377-60-3) at a concentration equivalent to the isothiazolone active ingredients (weight/weight) For use only as an antimicrobial agent in polymer latex emulsions.\nChloroform\nChloroprene\nChromium caseinate\nChromium nitrate\nChromium potassium sulfate\nCobaltous acetate\nCoconut fatty acid amine salt of tetrachlorophenol For use as preservative only.\nCopal\nCopper 8-quinolinolate For use as preservative only.\nCoumarone-indene resin\nCresyl diphenyl phosphate\nCumene hydroperoxide\nCyanoguanidine\nCyclized rubber as identified in § 176.170(b)(2) of this chapter\nCyclohexane\n1,4-Cyclohexanedimethanoldibenzoate (CAS Reg. No. 35541-81-2)\nCyclohexanol\nCyclohexanone resin\nCyclohexanone-formaldehyde condensate\nN-Cyclohexyl p-toluene sulfonamide\n(η5-Cyclopentadienyl)-(η6-isopropylbenzene)iron(II) hexafluorophosphate (CAS Reg. No. 32760-80-8) For use only as a photoinitiator.\nDamar\nDefoaming agents as described in § 176.210 of this chapter\nDehydroacetic acid\nDiacetone alcohol\nDiacetyl peroxide\nN,N′-Dialkoyl-4,4′-diaminodiphenylmethane mixtures where; the alkoyl groups are derived from marine fatty acids (C12-C24)\n2,5-Di-tert-amylhydroquinone\nDiamines derived from dimerized vegetable oil acids\nDiaryl-p-phenylenediamine, where the aryl group may be phenyl, tolyl, or xylyl\n1,2-Dibromo-2,4-dicyanobutane (CAS Registry No. 3569-65-7) For use as a preservative only.\n2,2-Dibromo-3-nitrilopropionamide (CAS Reg. No. 10222-01-2). For use as a preservative only.\n2,5-Di-tert-butylhydroquinone\nDibutyl maleate\n2,6-Di-tert-butyl-4-methylphenol For use as preservative only.\nDi(C7, C9-alkyl)adipate\nDibutyl sebacate\nDibutyltin dilaurate for use only as a catalyst for polyurethane resins\n1,2-Dichloroethylene (mixed isomers)\nDicumyl peroxide\nDicyclohexyl phthalate\nDiethanolamine\nDiethanolamine condensed with animal or vegetable fatty acids\nDiethylamine\nDiethylene glycol\nDiethylene glycol adipic acid copolymer\nDiethylene glycol dibenzoate\nDiethylene glycol hydrogenated tallowate monoester\nDiethylene glycol laurate\nDiethylene glycol monobutyl ether\nDiethylene glycol monobutyl ether acetate\nDiethylene glycol monoethyl ether\nDiethylene glycol monoethyl ether acetate\nDiethylene glycol monomethyl ether\nDiethylene glycol monooleate\nDiethylene glycol monophenyl ether\nDiethylene glycol copolymer of adipic acid and phthalic anhydride\nDi(2-ethylhexyl) adipate\nDi(2-ethylhexyl)phthalate\nDiethyl oxalate\nDi(2-hydroxy-5-tert-butylphenyl) sulfide\n2,2′-Dihydroxy-5,5′-dichlorodiphenylmethane (dichlorophene)\n4,5-Dihydroxy-2-imidazolidinone\n4-(Diiodomethylsulfonyl) toluene CA Registry No.: 20018-09-01 For use as an antifungal preservative only.\nDiisobutyl adipate\nDiisobutyl ketone\nDiisobutylphenoxyethoxyethyl dimethyl benzyl ammonium chloride\nDiisodecyl adipate\nDiisodecyl phthalate\nDiisopropylbenzene hydroperoxide\nN,N-Dimethylcyclohexylamine dibutyldithiocarbamate\nDimethyl formamide\nDimethyl hexynol\n2,2-Dimethyl-1,3-propanediol dibenzoate\nDimethyl octynediol\nN-(1,1-dimethyl-3-oxobutyl) acrylamide\n3,5-Dimethyl-1,3,5,2H-tetrahydrothiadiazine-2-thione For use as preservative only.\nDi-β-naphthyl-p-phenylenediamine\n4,6-Dinonyl-o-cresol\nDinonylphenol\nDi-n-octyldecyl adipate\nDioctyldiphenylamine\nDioctylsebacate\nDioxane\nDipentaerythritol pentastearate\nDipentamethylene-thiuram-tetrasulfide\nDipentene\nDipentene resins\nDipentene-beta-pinene-styrene resins\nDipentene-styrene resin (CAS Registry No. 64536-06-7)\nDiphenyl-2-ethylhexyl phosphate\nDiphenyl, hydrogen ated\nN,N′-Diphenyl-p-phenylenediamine\n1,3-Diphenyl-2-thiourea\nDipropylene glycol\nDipropylene glycol dibenzoate\nDipropylene glycol monomethyl ether\nDipropylene glycol copolymer of adipic acid and phthalic anhydride\nDisodium cyanodithioimidocarbonate\nDisodium 4-isodecyl sulfosuccinate (CAS Reg. No. 37294-49-8)\nN,N′-Distearoylethylenediamine\nDistearyl thiodipropionate\n3,5-Di-tert-butyl-4-hydroxyhydrocinnamic acid triester with 1,3,5-tris(2-hydroxyethyl)-s-triazine-2,4,6(1H, 3H, 5H)-trione For use as antioxidant only.\n4,4′-Dithiodimorpholine\nn-Dodecylmercaptan\ntert-Dodecylmercaptan\nDodecylphenoxybenzene-disulfonic acid and/or its calcium, magnesium, and sodium salts\nElemi gum\nEpichlorohydrin-4,4′-isopropylidenediphenol resin\nEpichlorohydrin-4,4′-sec-butylidenediphenol resin\nEpichlorohydrin-4,4′-isopropylidene-di-o-cresol resin\nEpichlorohydrin-phenolformaldehyde resin\nErucamide (erucylamide)\nEthanolamine\nEthoxylated primary linear alcohols of greater than 10 percent ethylene oxide by weight having molecular weights of 390 to 7,000 (CAS Reg. No. 97953-22-5)\nEthoxypropanol butyl ether\nEthyl alcohol (ethanol)\n5-Ethyl-1,3-diglycidyl-5-methylhydantoin (CAS Reg. No. 15336-82-0)\nEthylene-acrylic acid-carbon monoxide copolymer (CAS Reg. No. 97756-27-9)\nEthylene-acrylic acid copolymer, partial sodium salt containing no more than 20 percent acrylic acid by weight, and no more than 16 percent of the acrylic acid as the sodium salt (CAS Reg. No. 25750-82-7)\nEthylenediamine\nEthylenediaminetetra-acetic acid, calcium, ferric, potassium, or sodium salts, single or mixed\nEthylene dichloride\nEthylene glycol\nEthylene glycol monobutyl ether\nEthylene glycol monobutyl ether acetate\nEthylene glycol monoethyl ether\nEthylene glycol monoethyl ether acetate\nEthylene glycol monoethyl ether ricinoleate\nEthylene glycol monomethyl ether\nEthylene glycol monophenyl ether\nEthylene-carbon monoxide copolymer (CAS Reg. No. 25052-62-4) containing not more than 30 weight percent of the units derived from carbon monoxide\nEthylene-maleic anhydride copolymer, ammonium or potassium salt\nEthylene-methacrylic acid copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or zinc\nEthylene-methacrylic acid-vinyl acetate copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or zinc\nEthylene-octene-1 copolymers containing not less than 70 weight percent ethylene (CAS Reg. No. 26221-73-8)\nEthylene-propylene-dicyclopentadiene copolymer rubber\nEthylene, propylene, 1,4-hexadiene and 2,5-norbornadiene tetrapolymer\nEthylene-vinyl acetate carbon monoxide terpolymer (CAS Registry No. 26337-35-9) containing not more than 15 weight percent of units derived from carbon monoxide\n2,2′-Ethylidenebis (4,6-di-tert-butylphenol) (CAS Reg. No. 35958-30-6)\nEthyl-p-hydroxybenzoate For use as preservative only.\nEthyl hydroxyethylcellulose\nEthyl lactate\n2,2′-Ethylidenebis(4,6-di-tert-butylphenyl)fluorophosphonite (CAS Reg. No. 118337-09-0) For use as an antioxidant and/or stabilizer only.\nEthyl-p-toluene sulfonamide\nFats and oils derived from animal or vegetable sources, and the hydrogenated, sulfated, or sulfonated forms of such fats and oils\nFatty acids derived from animal or vegetable fats and oils; and salts of such acids, single or mixed, as follows:\nAluminum\nAmmonium\nCalcium\nMagnesium\nPotassium\nSodium\nZinc\nFerric chloride\nFluosilicic acid (hydrofluosilicic acid) For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.\nFormaldehyde\nFormaldehyde o- and p-toluene sulfonamide\nFormamide\nFumaratochromium (III) nitrate\nFurfural\nFurfuryl alcohol\nFumaric acid\ngamma-Aminopropyltrimethoxysilane (CAS Reg. No. 13822-56-5)\nGlutaraldehyde\nGlycerides, di- and monoesters\nGlycerol polyoxypropylene triol, minimum average molecular weight 250 (CAS Reg. No. 25791-96-2) For use only in the preparation of polyester and polyurethane resins in adhesives.\nGlyceryl borate (glycol boriborate resin)\nGlyceryl ester of damar, copal, elemi, and sandarac\nGlyceryl monobutyl ricinoleate\nGlyceryl monohydroxy stearate\nGlyceryl monohydroxy tallowate\nGlyceryl polyoxypropylene triol (average molecular weight 1,000)\nGlyceryl tribenzoate\nGlycol diacetate\nGlyoxal\nHeptane\nHexamethylenetetramine\nHexane\nHexanetriols\nHexylene glycol\nHydroabietyl alcohol\nHydrocarbon resins (produced by polymerization of mixtures of mono- and di-unsaturated hydrocarbons of the aliphatic, alicyclic, and monobenzenoid type derived both from cracked petroleum and terpene stocks) (CAS Reg. No. 68239-99-6)\nHydrocarbon resins (produced by the polymerization of styrene and alpha-methyl styrene), hydrogenated (CAS Reg. No. 68441-37-2)\nHydrofluoric acid For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.\nHydrogen peroxide\nHydrogenated dipentene resin (CAS Reg. No. 106168-39-2)\nHydrogenated dipentene-styrene copolymer resin (CAS Reg. No. 106168-36-9)\nHydrogenated-beta-pinene-alpha-pinene-dipentene copolymer resin (CAS Reg. No. 106168-37-0)\na-Hydro-omega-hydroxypoly-(oxytetramethylene) For use only in the preparation of polyurethane resins.\nHydroquinone\nHydroquinone monobenzyl ether\nHydroquinone monoethyl ether\n2(2′-Hydroxy-3′,5′ di-tert-amylphenyl) benzotriazole\nHydroxyacetic acid\n7-Hydroxycoumarin\nHydroxyethylcellulose\n2-Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl-1-propanone(CAS Reg. No. 106797-53-9) For use only as a photoinitiator at a level not to exceed 5 percent by weight of the adhesive.\n1-(2-Hydroxyethyl)-1-(4-chlorobutyl)-2 alkyl (C6-C17) imidazolinium chloride\nHydroxyethyldiethylenetriamine\nβ-Hydroxyethyl pyridinium 2-mercaptobenzothiazol\nHydroxyethyl starch\nHydroxyethylurea\nHydroxylamine sulfate\n5-Hydroxymethoxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, 5-hydroxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, and 5-hydroxypoly-[methyleneoxy]methyl-1-aza-3,7-dioxabicyclo[3.3.0] octane mixture For use only as an antibacterial preservative.\nHydroxypropyl methylcellulose\n2-(Hydroxymethyl)-2-methyl-1,3-propanediol tribenzoate\n2-Imidazolidinone\n3-Iodo-2-propynyl-N-butyl carbamate (CAS Reg. No. 55406-53-6) For use only as an antifungal preservative.\nIodoform For use only as polymerization-control agent.\nIsoascorbic acid\nIsobutyl alcohol (isobutanol)\nIsobutylene-isoprene copolymer\nIsodecyl benzoate (CAS Reg. No. 131298-44-7)\nIsophorone\nIsopropanolamine (mono-, di-, tri-)\nIsopropyl acetate\nIsopropyl alcohol (isopropanol)\nIsopropyl-m- and p-cresol (thymol derived)\n4,4′-Isopropylidenediphenol\n4,4′-Isopropylidenediphenol, polybutylated mixture For use as preservative only.\nIsopropyl peroxydicarbonate\np-Isopropoxy diphenylamine\n4,4′-Isopropylidene-bis(p-phenyleneoxy)-di-2-propanol\nItaconic acid\nJapan wax\nKerosene\nLauroyl peroxide\nLauroyl sulfate salts:\nAmmonium\nMagnesium\nPotassium\nSodium\nLauryl alcohol\nLauryl pyridinium 5-chloro-2-mercaptobenzothiazole\nLignin calcium sulfonate\nLignin sodium sulfonate\nLinoleamide (linoleic acid amide)\nMagnesium fluoride For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesives.\nMagnesium glycerophosphate\nMaleic acid\nMaleic anhydride-diisobutylene copolymer, ammonium or sodium salt\nManganese acetate\nMarine oil fatty acid soaps, hydrogenated\nMelamine\nMelamine-formaldehyde copolymer\n2-Mercaptobenzothiazole\n2-Mercaptobenzothiazole and dimethyl dithiocarbamic acid mixture, sodium salt For use as preservative only.\n2-Mercaptobenzothiazole, sodium or zinc salt For use as preservative only.\nMethacrylate-chromic chloride complex, ethyl or methyl ester\np-Menthane hydroperoxide\nMethyl acetate\nMethyl acetyl ricinoleate\nMethyl alcohol (methanol)\nMethylcellulose\nMethylene chloride\n4,4′-Methylenebis(2,6-di-tert-butylphenol)\n2,2-Methylenebis (4-ethyl-6-tert-butylphenol)\n2,2-Methylenebis (4-methyl-6-nonylphenol)\n2,2-Methylenebis (4-methyl-6-tert-butylphenol)\nMethyl ethyl ketone\nMethyl ethyl ketone-formaldehyde condensate\n2-Methylhexane\n1-Methyl-2-hydroxy-4-isopropyl benzene\nMethyl isobutyl ketone\nMethyl oleate\nMethyl oleate-palmitate mixture\nMethyl ricinoleate\nMethyl salicylate\na-Methylstyrene-vinyltoluene copolymer resins (molar ratio 1 a methylstyrene to 3 vinyltoluene)\nMethyl tallowate\nMineral oil\nMonochloracetic acid\nMonooctyldiphenylamine\nMontan wax\nMorpholine\nMyristic acid-chromic chloride complex\nMyristyl alcohol\nNaphtha\nNaphthalene, monosulfonated\nNaphthalene sulfonic acid-formaldehyde condensate, sodium salt\nα-Naphthylamine\nα,α′,α″,α″′-Neopentane tetrayltetrakis [omega-hydroxypoly (oxypropylene) (1-2 moles)], average molecular weight 400\nNitric acid\nµ-Nitrobiphenyl\nNitrocellulose\n2-Nitropropane\nα-(p-Nonylphenyl)-omega-hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters; the nonyl group is a propylene trimer isomer and the poly (oxyethylene) content averages 6-9 moles or 50 moles\nα(p-Nonylphenyl)-omega-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of p-nonylphenol (nonyl group is a propylene trimer isomer) with an average of 1-40 moles of ethylene oxide\nα-(p-Nonylphenyl)-omega-hydroxypoly (oxyethylene) sulfate, ammonium salt: the nonyl group is a propylene trimer isomer and the poly (oxyethylene) content averages 9 or 30 moles\nendo-cis-5-Norbornene-2,3-dicarboxylic anhydride\nα-cis-9-Octadecenyl-omega-hydroxypoly (oxyethylene); the octadecenyl group is derived from oleyl alcohol and the poly (oxyethylene) content averages 20 moles\nOctadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate\nOctyl alcohol\nOctylphenol\nOctylphenoxyethanols\nOctylphenoxypolyethoxy-polypropoxyethanol (13 moles of ethylene oxide and propylene oxide)\nOdorless light petroleum hydrocarbons\nOleamide (oleic acid amide)\nOleic acid, sulfated\n2,2′-Oxamidobis[ethyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS Reg. No. 70331-94-1)\nOxazoline\nα-(oxiranylmethyl)-ω-(oxiranylmethoxy)poly[oxy(methyl-1,2-ethanediyl)], (alternative name: epichlorohydrin-polypropylene glycol) (CAS Reg. No. 26142-30-3) For use as a reactant in the preparation of epoxy-based resins.\n2,2′-[oxybis[(methyl-2,1-ethanediyl)-oxymethylene]]bisoxirane, (alternative name: epichlorohydrin-dipropylene glycol) (CAS Reg. No. 41638-13-5) For use as a reactant in the preparation of epoxy-based resins.\nn-Oxydiethylene-benzothiazole\nPalmitamide (palmitic acid amide)\nParaffin (C12-C20) sulfonate\nParaformaldehyde\nPentachlorophenol\nPentaerythritol ester of maleic anhydride\nPentaerythritol monostearate For use as preservative only.\nPentaerythritol tetrabenzoate [CAS Registry No. 4196-86-5]\nPentaerythritol tetrastearate\n2,4-Pentanedione\nPentasodium diethylenetriaminepentaacetate (CAS Reg. No. 140-01-2)\nPerchloroethylene\nPetrolatum\nPetroleum hydrocarbon resin (cyclopentadiene type), hydrogenated\nPetroleum hydrocarbon resin (produced by the catalytic polymerization and subsequent hydrogenation of styrene, vinyltoluene, and indene types from distillates of cracked petroleum stocks)\nPetroleum hydrocarbon resins (produced by the homo-and copolymerization of dienes and olefins of the aliphatic, alicyclic, and monobenzenoid arylalkene types from distillates of cracked petroleum stocks)\nPhenol For use as preservative only.\nPhenol-coumarone-indene resin\nPhenolic resins as described in § 175.300(b)(3)(vi)\nPhenothiazine For use only as polymerization-control agent.\nPhenyl-β-naphthylamine (free of β-naphthylamine)\no-Phenylphenol For use as preservative only.\no-Phthalic acid\nPimaric acid\nPine oil\nPiperazine\nPiperidinium pentamethylenedithiocarbamate\nPoly(acrylamide-[2-acrylamide-2-methylpropylsulfonate]-dimethylidiallyl ammonium chloride) sodium salt (CAS Reg. No. 72275-68-4)\nPolyamides derived from reaction of one or more of the following acids with one or more of the following amines:\nAcids:\nAzelaic acid\nDimerized vegetable oil acids\nAmines:\nBis(hexamethylene) triamine and higher homologues\nDiethylenetriamine\nDiphenylamine\nEthylenediamine\nHexamethylenediamine\nPoly(oxypropylene)diamine (weight average molecular weight 2010) (CAS Reg. No. 9046-10-0)\nPoly(oxypropylene)diamine (weight average molecular weight 440) (CAS Reg. No. 9046-10-0)\nTetraethylenepentamine\nTriethylenetetramine\nPolybutene, hydrogenated\nPolybutylene glycol (molecular weight 1,000)\nPoly [2(diethylamino) ethyl methacrylate] phosphate\nPolyester of adipic acid, phthalic acid, and propylene glycol, terminated with butyl alcohol\nPolyester of diglycolic acid and propylene glycol containing ethylene glycol monobutyl ether as a chain stopper\nPolyester resins (including alkyd type), as the basic polymer, formed as esters when one or more of the following acids are made to react with one or more of the following alcohols:\nAcids:\nAzelaic acid\nDimethyl 1,4-cyclohexanedicarboxylate (CAS Reg. No. 94-60-0)\nDimethyl-5-sulfoisophthalic acid (CAS Reg. No. 50975-82-1) and/or its sodium salt (CAS Reg. No. 3965-55-7)\nPolybasic and monobasic acids identified in § 175.300(b)(3)(vii)(a) and (b)\n5-sulfo-1,3-benzenedicarboxylic acid, monosodium salt (CAS Reg. No. 6362-79-4)\nTetrahydrophthalic acid\nAlcohols:\n1,4-Cyclohexanedimethanol\n2,2-Dimethyl-1,3-propanediol\n1,6-Hexanediol (CAS Reg. No. 629-11-8)\nPolyhydric and monohydric alcohols identified in § 175.300(b)(3)(vii)(c) and (d)\nPolyethyleneadipate modified with ethanolamine with the molar ratio of the amine to the adipic acid less than 0.1 to 1 For use only in the preparation of polyurethan resins.\nPolyethylene glycol (molecular weight 200-6,000)\nPolyethylene glycol mono-isotridecyl ether sulfate, sodium salt (CAS Reg. No. 150413-26-6)\nPolyethyleneglycol alkyl(C10-C12)ether sulfosuccinate, disodium salt (CAS Reg. No. 68954-91-6)\nPolyethylene, oxidized\nPolyethylene resins, carboxyl modified, identified in § 177.1600 of this chapter\nPolyethylenimine\nPolyethylenimine-epichlorohydrin resins\nPoly(ethyloxazoline) (CAS Reg. No. 25805-17-8)\nPolyisoprene\nPolymeric esters of polyhydric alcohols and polycarboxylic acids prepared from glycerin and phthalic anhydride and modified with benzoic acid, castor oil, coconut oil, linseed oil, rosin, soybean oil, styrene, and vinyl toluene\nPolymers: Homopolymers and copolymers of the following monomers:\nAcrylamide\nAcrylic acid\nAcrylonitrile\nAllylmethacrylate (CAS Reg. No. 00096-05-09)\nButadiene\nButene\nN-tert-Butylacrylamide\nButyl acrylate\n1,3-Butylene glycol dimethacrylate\nButyl methacrylate\nCrotonic acid\nDecyl acrylate\nDiallyl fumarate\nDiallyl maleate\nDiallyl phthalate\nDibutyl fumarate\nDibutyl itaconate\nDibutyl maleate\nDi(2-ethylhexyl) maleate\nDimethyl-α-methylstyrene\nDioctyl fumarate\nDioctyl maleate\nDivinylbenzene\nEthyl acrylate\nEthylene\nEthylene cyanohydrin\n2-Ethylhexyl acrylate\nEthyl methacrylate\nFatty acids, C10-13-branched, vinyl esters (CAS Reg. No. 184785-38-4)\nFumaric acid and/or its methyl, ethyl, propyl, butyl, amyl hexyl, heptyl and octyl esters\nGlycidyl methacrylate\n1-Hexene (CAS Reg. No. 592-41-6)\n2-Hydroxyethyl acrylate\n2-Hydroxyethyl methacrylate\n2-Hydroxypropyl methacrylate\nIsobutyl acrylate\nIsobutylene\nItaconic acid\nMaleic acid, diester with 2-hydroxyethanesulfonic acid, sodium salt\nMaleic anhydride\nMethacrylic acid\nMethyl acrylate\nN,N′-Methylenebisacrylamide\nMethyl methacrylate\nN-Methylolacrylamide\nMethyl styrene\n-Methyl styrene\nMonoethyl maleate\nMonomethyl maleate\nMono (2-ethylhexyl) maleate\n5-Norbornene-2 3-dicarboxylic acid, mono-n-butyl ester\n1-Octene (CAS Reg. No. 111-66-0)\nPropyl acrylate\nPropylene\nStyrene\nTriallyl cyanurate\nVinyl acetate\nVinyl alcohol (from alcoholysis or hydrolysis of vinyl acetate units)\nVinyl butyrate\nVinyl chloride\nVinyl crotonate\nVinyl ethyl ether\nVinyl hexoate\nVinylidene chloride\nVinyl methyl ether\nVinyl pelargonate\nVinyl propionate\nVinyl pyrrolidone\nVinyl stearate\nPolyoxyalkylated-phenolic resin (phenolic resin obtained from formaldehyde plus butyl- and/or amylphenols, oxyalkylated with ethylene oxide and/or propylene oxide)\nPoly(oxycaproyl) diols and triols (minimum molecular weight 500)\nPolyoxyethylated (40 moles) tallow alcohol sulfate, sodium salt\nPolyoxyethylene (20 mol)—anhydrous lanolin adduct\nPolyoxyethylene (molecular weight 200) dibenzoate\nPolyoxyethylene (molecular weight 200-600) esters of fatty acids derived from animal or vegetable fats and oils (including tall oil)\nPolyoxyethylene (15 moles) ester of rosin\nPolyoxyethylene (4-5 moles) ether of phenol\nPolyoxyethylene (25 moles)—glycerol adduct\nPolyoxyethylene (40 moles) stearate\nPolyoxyethylene (5-15 moles) tridecyl alcohol\nPolyoxypropylene (3 moles) tridecyl alcohol sulfate\nPolyoxypropylene (20 moles) butyl ether\nPolyoxypropylene (40 moles) butyl ether\nPolyoxypropylene (20 moles) oleate butyl ether\nPolyoxypropylene-polyoxyethylene condensate (minimum molecular weight 1,900)\nPolypropylene glycol (minimum molecular weight 150)\nPolypropylene glycol (3-4 moles) triether with 2-ethyl-2-(hydroxymethyl)-1,3-propane-diol, average molecular weight 730\nPolypropylene glycol dibenzoate (CAS Reg. No. 72245-46-6) For use as a plasticizer at levels not to exceed 20 percent by weight of the finished adhesive.\nPolypropylene, noncrystalline\nPolysiloxanes:\nDiethyl polysiloxane\nDihydrogen polysiloxane\nDimethyl polysiloxane\nDiphenyl polysiloxane\nEthyl hydrogen polysiloxane\nEthyl phenyl polysiloxane\nMethyl ethyl polysiloxane\nMethyl hydrogen polysiloxane\nMethyl phenyl polysiloxane\nPhenyl hydrogen polysiloxane\nPolysorbate 60\nPolysorbate 80\nPolysorbate 20 (polyoxyethylene (20) sorbitan monolaurate)\nPolysorbate 40 (polyoxyethylene (20) sorbitan monopalmitate)\nPoly[styrene-co-disodium maleate-co-α-(p-nonyl-phenyl)-omega-(p-vinyl-benzyl)poly(oxyethylene)] terpolymer\nPolytetrafluoroethylene.\nPolyurethane resins produced by: (1) reacting diisocyanates with one or more of the polyols or polyesters named in this paragraph, or (2) reacting the chloroformate derivatives of one or more of the polyols or polyesters named in this paragraph with one or more of the polyamines named in this paragraph, or (3) reacting toluene diisocyanate or 4,4′ methylenebis(cyclohexylisocyanate) (CAS Reg. No. 5124-30-1) with: (i) one or more of the polyols or polyesters named in this paragraph and with either N-methyldiethanolamine (CAS Reg. No. 105-59-9) and dimethyl sulfate (CAS Reg. No. 77-78-1) or dimethylolpropionic acid (CAS Reg. No. 4767-03-7) and triethylamine (CAS Reg. No. 121-44-8), or (ii) a fumaric acid-modified polypropylene glycol or fumaric acid-modified tripropylene glycol), triethylamine (CAS Reg. No. 107-15-3), and ethylenediamine (CAS Reg. No. 121-44-8), or (4) reacting meta-tetramethylxylene diisocyanate (CAS Reg. No. 2778-42-9) with one or more of the polyols and polyesters listed in this paragraph and with dimethylolpropionic acid (CAS Reg. No. 4767-03-7) and triethylamine (CAS Reg. No. 121-44-8), N-methyldiethanolamine (CAS Reg. No. 105-59-9), 2-dimethylaminoethanol (CAS Reg. No. 108-01-0), 2-dimethylamino-2-methyl-1-propanol (CAS Reg. No. 7005-47-2), and/or 2-amino-2-methyl-1-propanol (CAS Reg. No. 124-68-5)\nPolyvinyl alcohol modified so as to contain not more than 3 weight percent of comonomer units derived from 1-alkenes having 12 to 20 carbon atoms\nPolyvinyl butyral\nPolyvinyl formal\nPotassium ferricyanide For use only as polymerization-control agent.\nPotassium N-methyldithiocarbamate\nPotassium pentachlorophenate For use as preservative only.\nPotassium permanganate\nPotassium persulfate\nPotassium phosphates (mono-, di-, tribasic)\nPotassium tripolyphosphate\nα, α′, α″-1,2,3-Propanetriyltris [omega-(2,3-epoxypropoxy) poly (oxypropylene) (24 moles)]\nβ-Propiolactone\nPropyl alcohol (propanol)\nPropylene carbonate\nPropylene glycol and p-p′-isopropylidenediphenol diether\nPropylene glycol dibenzoate (CAS Reg. No. 19224-26-1) For use as a plasticizer at levels not to exceed 20 percent by weight of the finished adhesive.\nPropylene glycol esters of coconut fatty acids\nPropylene glycol monolaurate\nPropylene glycol monomethyl ether\nPropylene glycol monostearate\nα, α′, α″-[Propylidynetris (methylene)] tris [omega-hydroxypoly (oxypropylene) (1.5 moles minimum)], minimum molecular weight 400\nQuaternary ammonium chloride (hexadecyl, octadecyl derivative) For use as preservative only.\nRosin (wood, gum, and tall oil rosin), rosin dimers, decarboxylated rosin (including rosin oil, disproportionated rosin, and these substances as modified by one or more of the following reactants:\nAlkyl (C1-C9) phenolformaldehyde\nAmmonia\nAmmonium caseinate-p-Cyclohexylphenolformaldehyde\nDiethylene glycol\nDipentaerythritol\nEthylene glycol\nFormaldehyde\nFumaric acid\nGlycerin\nHydrogen\nIsophthalic acid\n4,4′-Isopropylidenediphenol-epichlorohydrin (epoxy)\n4,4′-Isopropylidenediphenol-formaldehyde\nMaleic anhydride\nMethyl alcohol\nPentaerythritol\nPhthalic anhydride\nPolyethylene glycol\nPhenol-formaldehyde\nPhenyl μ-cresol-formaldehyde\np-Phenylphenol-formaldehyde\nSulfuric acid\nTriethylene glycol\nXylenol-formaldehyde\nRosin salts (salts of wood, gum, and tall oil rosin, and the dimers thereof, decarboxylated rosin disproportionated rosin, hydrogenated rosin):\nAluminum\nAmmonium\nCalcium\nMagnesium\nPotassium\nSodium\nZinc\nRosin, gasoline-insoluble fraction\nRubber hydrochloride polymer\nRubber latex, natural\nSalicylic acid For use as preservative only.\nSandarac\nSebacic acid\nShellac\nSilicon dioxide as defined in § 172.480(a) of this chapter\nSodium alkyl (C2-C13.5 aliphatic) benezenesulfonate\nSodium aluminum pyrophosphate\nSodium aluminum sulfate\nSodium bisulfate\nSodium calcium silicate\nSodium capryl polyphosphate\nSodium carboxymethylcellulose\nSodium chlorate\nSodium chlorite\nSodium chromate\nSodium decylsulfate\nSodium dehydroacetate For use as preservative only.\nSodium di-(2-ethylhexoate)\nSodium di-(2-ethylhexyl) pyrophosphate\nSodium dihexylsulfosuccinate\nSodium dissobutylphenoxydiethoxyethyl sulfonate\nSodium diisobutylphenoxymonoethoxyethyl sulfonate\nSodium diisopropyl- and triisopropylnaphthalenesulfonate\nSodium dimethyldithiocarbamate\nSodium dioctylsulfosuccinate\nSodium n-dodecylpolyethoxy (50 moles) sulfate\nSodium ethylene ether of nonylphenol sulfate\nSodium 2-ethylhexyl sulfate\nSodium fluoride For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride for all sources not to exceed 1 percent by weight of the finished adhesive.\nSodium formaldehyde sulfoxylate\nSodium formate\nSodium heptadecylsulfate\nSodium hypochlorite\nSodium isododecylphenoxypolyethoxy (40 moles) sulfate\nSodium N-lauroyl sarcosinate\nSodium metaborate\nSodium α-naphthalene sulfonate\nSodium nitrate\nSodium nitrite\nSodium oleoyl isopropanolamide sulfosuccinate\nSodium pentachlorophenate For use as preservative only.\nSodium perborate\nSodium persulfate\nSodium μ-phenylphenate For use as preservative only.\nSodium polyacrylate\nSodium polymethacrylate\nSodium polystyrene sulfonate\nSodium salicylate For use as preservative only.\nSodium salt of 1-hydroxy 2(1H)-pyridine thione Do.\nSodium tetradecylsulfate\nSodium thiocyanate\nSodium bis-tridecylsulfosuccinate\nSodium xylene sulfonate\nSorbitan monooleate\nSorbitan monostearate\nSoybean oil, epoxidized\nSpermaceti wax\nSperm oil wax\nStannous 2-ethylhexanoate For use only as a catalyst for polyurethane resins.\nStannous stearate\nStarch hydrolysates\nStarch or starch modified by one or more of the treatments described in §§ 172.892 and 178.3520 of this chapter\nStarch, reacted with a urea-formaldehyde resin\nStarch, reacted with formaldehyde\nStearamide (stearic acid amide)\nStearic acid\nStearic acid-chromic chloride complex\nStearyl-cetyl alcohol, technical grade, approximately 65 percent-80 percent stearyl and 20 percent-35 percent cetyl\nStrontium salicylate\nStyrenated phenol\nStyrene block polymers with 1,3-butadiene\nStyrene-maleic anhydride copolymer, ammonium or potassium salt\nStyrene-maleic anhydride copolymer (partially methylated) sodium salt\nStyrene-methacrylic acid copolymer, potassium salt\nSucrose acetate isobutyrate\nSucrose benzoate\nSucrose octaacetate\n2-sulfoethyl methacrylate (CAS Registry No. 10595-80-9) For use at levels not to exceed 2 percent by weight of the dry adhesive.\nα-Sulfo-omega-(dodecyloxy)poly (oxyethylene), ammonium salt\nSulfonated octadecylene (sodium form)\nSulfosuccinic acid 4-ester with polyethylene glycol dodecyl ether disodium salt (alcohol moiety produced by condensation of 1 mole of n-dodecyl alcohol and an average of 5-6 moles of ethylene oxide, Chemical Abstracts Service Registry No. 039354-45-5)\nSulfosuccinic acid 4-ester with polyethylene glycol nonylphenyl ether, disodium salt (alcohol moiety produced by condensation of 1 mole of nonylphenol and an average of 9-10 moles of ethylene oxide) (CAS Reg. No. 9040-38-4)\nSulfur\nSynthetic primary linear aliphatic alcohols whose weight average molecular weight is greater than 400 (CAS Reg. No. 71750-71-5)\nSynthetic wax polymer as described in § 176.170(a)(5) of this chapter\nTall oil\nTall oil fatty acids, linoleic and oleic\nTall oil fatty acid methyl ester\nTall oil, methyl ester\nTall oil pitch\nTall oil soaps\nTallow alcohol (hydrogenated)\nTallow amine, secondary (hexadecyl, octadecyl), of hard tallow\nTallow, blown (oxidized)\nTallow, propylene glycol ester\nTerpene resins (α-and β-pinene) homopolymers, copolymers, and condensates with phenol, formaldehyde, coumarone, and/or indene\nTerphenyl\nTerphenyl, hydrogenated\nTerpineol\nTetraethylene pentamine\nTetraethylthiuram disulfide\nTetrahydrofuran\nTetrahydrofurfuryl alcohol\nTetra-isopropyl titanate\nTetrakis[methylene (3,5-di-tert-butyl-4-hydroxy-hydro-cinnamate)] methane\na[p-(1,1,3,3-Tetramethylbutyl) phenyl]-omega-hydroxypoly-(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3-tetramethylbutyl) phenol with an average of 1-40 moles of ethylene oxide\na-[p-(1,1,3,3-Tetramethylbutyl) phenyl]-omega-hydroxy-poly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and their sodium, potassium, and ammonium salts having a poly(oxyethylene) content averaging 6-9 or 40 moles\nTetramethyl decanediol\nTetramethyl decynediol\nTetramethyl decynediol plus 1-30 moles of ethylene oxide\nTetramethylthiuram monosulfide\nTetrasodium N-(1,2-dicarboxyethyl)N-octadecylsulfosuccinamate\n4,4′-Thiobis-6-tert-butyl-m-cresol\nThiodiethylene-bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate)\n2,2′-(2,5-Thiophenediyl) bis[5-tert-butylbenzoxazole]\nThiram\nThymol For use as preservative only.\nTitanium dioxide\nTitanium dioxide-barium sulfate\nTitanium dioxide-calcium sulfate\nTitanium dioxide-magnesium silicate\nToluene\nToluene 2,4-diisocyanate\nToluene 2,6-diisocyanate\no- and p-Toluene ethyl sulfonamide\no- and p-Toluene sulfonamide\np-Toluene sulfonic acid\np-(p′-Toluene-sulfonylamide)-diphenylamide\nTriazine-formaldehyde resins as described in § 175.300(b)(3)(xiii)\nTributoxyethyl phosphate\nTributylcitrate\nTri-tert-butyl-p-phenyl phenol For use as preservative only.\nTributyl phosphate\nTributyltin chloride complex of ethylene oxide condensate of dehydroabietylamine For use as preservative only.\nTri-n-butyltin acetate For use as preservative only.\nTri-n-butyltin neodecanoate Do.\n1,1,1-Trichloroethane\n1,1,2-Trichloroethane\nTrichloroethylene\nTri-β-chloroethylphosphate\nTridecyl alcohol\nTriethanolamine\n3-(Triethoxysilyl) propylamine\nTriethylene glycol\nTriethylene glycol dibenzoate\nTriethylene glycol di(2-ethylhexoate)\nTriethylene glycol polyester of benzoic acid and phthalic acid\nTriethylhexyl phosphate\nTriethylphosphate\n2,4,5-Trihydroxy butyrophenone\nTriisopropanolamine\nTrimethylol propane\n2,2,4-Trimethylpentanediol-1,3-diisobutyrate\nTrimeric aromatic amine resin from diphenylamine and acetone of molecular weight approximately 500\nTri(nonylphenyl) phosphite-formaldehyde resins As identified in § 177.2600(c)(4)(iii) of this chapter. For use only as a stabilizer.\nTriphenylphosphate\nTripropylene glycol monomethyl ether\n1,3,5-Tris (3,5-di-tert-butyl-4-hydroxy-benzyl)-triazine-2,4,6 (1H,3H,5H)-trione\nTris (p-tertiary butyl phenyl) phosphate\nTris(2-methyl-4-hydroxy-5-tert-butyl-phenyl)butane\nTrisodium N-hydroxyethylethylenediaminetriacetate (CAS Reg. No. 139-89-9)\nTurpentine\nUrea-formaldehyde resins as described in § 175.300(b)(3)(xii)\nVegetable oil, sulfonated or sulfated, potassium salt\nVinyl acetate-maleic anhydride copolymer, sodium salt\nWaxes, petroleum\nWax, petroleum, chlorinated (40% to 70% chlorine)\nWaxes, synthetic paraffin (Fischer-Tropsch process)\n3-(2-Xenolyl)-1,2-epoxypropane\nXylene\nXylene (or toluene) alkylated with dicyclopentadiene\nZein\nZinc acetate\nZinc ammonium chloride\nZinc dibenzyl dithiocarbamate\nZinc dibutyldithiocarbamate\nZinc diethyldithiocarbamate\nZinc di(2-ethylhexoate)\nZinc formaldehyde sulfoxylate\nZinc naphthenate and dehydroabietylamine mixture\nZinc nitrate\nZinc orthophosphate\nZinc resinate\nZinc sulfide\nZineb (zinc ethylenebis-dithiocarbamate)\nZiram (zinc dimethyldithiocarbamate)","path":["Title 21—Food and Drugs","CHAPTER I—FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES","SUBCHAPTER B—FOOD FOR HUMAN CONSUMPTION","PART 175—INDIRECT FOOD ADDITIVES: ADHESIVES AND COMPONENTS OF COATINGS","Subpart B—Substances for Use Only as Components of Adhesives"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-21.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:47Z","sha256":"5d27e583d0bd55d60f96c9cf322a7bd57e2794d0e514e3f9b6bb54ea5309b1a8","source_id":"us-cfr","stale":true,"prev":"us/21-cfr-174.6","next":"us/21-cfr-175.125"},"notice":"GroundRules: Original legal text. Not legal advice."}