{"data":{"id":"us/29-cfr-appendix-g-to-subpart-v-of-part-1926","jurisdiction":"us","citation":"29 CFR Appendix G to Subpart V of Part 1926","heading":"Appendix G to Subpart V of Part 1926—Reference Documents","body":"The references contained in this appendix provide information that can be helpful in understanding and complying with the requirements contained in Subpart V of this part. The national consensus standards referenced in this appendix contain detailed specifications that employers may follow in complying with the more performance-based requirements of Subpart V of this part. Except as specifically noted in Subpart V of this part, however, the Occupational Safety and Health Administration will not necessarily deem compliance with the national consensus standards to be compliance with the provisions of Subpart V of this part.\nANSI/SIA A92.2-2009, American National Standard for Vehicle-Mounted Elevating and Rotating Aerial Devices.\nANSI Z133-2012, American National Standard Safety Requirements for Arboricultural Operations—Pruning, Trimming, Repairing, Maintaining, and Removing Trees, and Cutting Brush.\nANSI/IEEE Std 935-1989, IEEE Guide on Terminology for Tools and Equipment to Be Used in Live Line Working.\nASME B20.1-2012, Safety Standard for Conveyors and Related Equipment.\nASTM D120-09, Standard Specification for Rubber Insulating Gloves.\nASTM D149-09 (2013), Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies.\nASTM D178-01 (2010), Standard Specification for Rubber Insulating Matting.\nASTM D1048-12, Standard Specification for Rubber Insulating Blankets.\nASTM D1049-98 (2010), Standard Specification for Rubber Insulating Covers.\nASTM D1050-05 (2011), Standard Specification for Rubber Insulating Line Hose.\nASTM D1051-08, Standard Specification for Rubber Insulating Sleeves.\nASTM F478-09, Standard Specification for In-Service Care of Insulating Line Hose and Covers.\nASTM F479-06 (2011), Standard Specification for In-Service Care of Insulating Blankets.\nASTM F496-08, Standard Specification for In-Service Care of Insulating Gloves and Sleeves.\nASTM F711-02 (2007), Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools.\nASTM F712-06 (2011), Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers.\nASTM F819-10, Standard Terminology Relating to Electrical Protective Equipment for Workers.\nASTM F855-09, Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment.\nASTM F887-12 e1, Standard Specifications for Personal Climbing Equipment.\nASTM F914/F914M-10, Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments.\nASTM F1116-03 (2008), Standard Test Method for Determining Dielectric Strength of Dielectric Footwear.\nASTM F1117-03 (2008), Standard Specification for Dielectric Footwear.\nASTM F1236-96 (2012), Standard Guide for Visual Inspection of Electrical Protective Rubber Products.\nASTM F1430/F1430M-10, Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments.\nASTM F1505-10, Standard Specification for Insulated and Insulating Hand Tools.\nASTM F1506-10a, Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards.\nASTM F1564-13, Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers.\nASTM F1701-12, Standard Specification for Unused Polypropylene Rope with Special Electrical Properties.\nASTM F1742-03 (2011), Standard Specification for PVC Insulating Sheeting.\nASTM F1796-09, Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC.\nASTM F1797-09 ε 1, Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks.\nASTM F1825-03 (2007), Standard Specification for Clampstick Type Live Line Tools.\nASTM F1826-00 (2011), Standard Specification for Live Line and Measuring Telescoping Tools.\nASTM F1891-12, Standard Specification for Arc and Flame Resistant Rainwear.\nASTM F1958/F1958M-12, Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins.\nASTM F1959/F1959M-12, Standard Test Method for Determining the Arc Rating of Materials for Clothing.\nIEEE Stds 4-1995, 4a-2001 (Amendment to IEEE Standard Techniques for High-Voltage Testing), IEEE Standard Techniques for High-Voltage Testing.\nIEEE Std 62-1995, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus—Part 1: Oil Filled Power Transformers, Regulators, and Reactors.\nIEEE Std 80-2000, Guide for Safety in AC Substation Grounding.\nIEEE Std 100-2000, The Authoritative Dictionary of IEEE Standards Terms Seventh Edition.\nIEEE Std 516-2009, IEEE Guide for Maintenance Methods on Energized Power Lines.\nIEEE Std 524-2003, IEEE Guide to the Installation of Overhead Transmission Line Conductors.\nIEEE Std 957-2005, IEEE Guide for Cleaning Insulators.\nIEEE Std 1048-2003, IEEE Guide for Protective Grounding of Power Lines.\nIEEE Std 1067-2005, IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and ±750 kV DC.\nIEEE Std 1307-2004, IEEE Standard for Fall Protection for Utility Work.\nIEEE Stds 1584-2002, 1584a-2004 (Amendment 1 to IEEE Std 1584-2002), and 1584b-2011 (Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002), IEEE Guide for Performing Arc-Flash Hazard Calculations.\nIEEE C2-2012, National Electrical Safety Code.\nNFPA 70E-2012, Standard for Electrical Safety in the Workplace.","path":["Title 29—Labor","Subtitle B—Regulations Relating to Labor","CHAPTER XVII—OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR","PART 1926—SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION","Subpart V—Electric Power Transmission and Distribution"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-29.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:25:20Z","sha256":"ec190adcc66cd64df2eb364e1484fc0e7069d058108dbd086a966b4a0404ed2e","source_id":"us-cfr","stale":true,"prev":"us/29-cfr-appendix-f-to-subpart-v-of-part-1926","next":"us/29-cfr-1926.1000"},"notice":"GroundRules: Original legal text. Not legal advice."}