{"data":{"id":"us/30-cfr-250.1716","jurisdiction":"us","citation":"30 CFR 250.1716","heading":"To what depth must I remove wellheads and casings?","body":"(a) Unless the District Manager approves an alternate depth under paragraph (b) of this section, you must remove all wellheads and casings to at least 15 feet below the mud line.\n(b) The District Manager may approve an alternate removal depth if:\n(1) The wellhead or casing would not become an obstruction to other users of the seafloor or area, and geotechnical and other information you provide demonstrate that erosional processes capable of exposing the obstructions are not expected; or\n(2) You determine, and BSEE concurs, that you must use divers, and the seafloor sediment stability poses safety concerns; or\n(3) The water depth is greater than 1,000 feet.","path":["Title 30—Mineral Resources","CHAPTER II—BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR","SUBCHAPTER B—OFFSHORE","PART 250—OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF","Subpart Q—Decommissioning Activities"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-30.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:25:24Z","sha256":"65a337ac7825148de0709823467b51ae447683c204def75c60391b8512ac09e0","source_id":"us-cfr","stale":true,"prev":"us/30-cfr-250.1715","next":"us/30-cfr-250.1717"},"notice":"GroundRules: Original legal text. Not legal advice."}