{"data":{"id":"us/30-cfr-75.1435","jurisdiction":"us","citation":"30 CFR 75.1435","heading":"Load end attachments.","body":"(a) Wire rope shall be attached to the load by a method that develops at least 80 percent of the nominal strength of the rope.\n(b) Except for terminations where use of other materials is a design feature, zinc (spelter) shall be used for socketing wire ropes. Design feature means either the manufacturer's original design or a design approved by a registered professional engineer.\n(c) Load end attachment methods using splices are prohibited.","path":["Title 30—Mineral Resources","CHAPTER I—MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR","SUBCHAPTER O—COAL MINE SAFETY AND HEALTH","PART 75—MANDATORY SAFETY STANDARDS—UNDERGROUND COAL MINES","Subpart O—Hoisting and Mantrips"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-30.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:25:24Z","sha256":"2ffebad2b8bd74b98adc1b378410e7381f86ba90652455beaa128d7cca089b5d","source_id":"us-cfr","stale":true,"prev":"us/30-cfr-75.1434","next":"us/30-cfr-75.1436"},"notice":"GroundRules: Original legal text. Not legal advice."}