{"data":{"id":"us/33-cfr-154.510","jurisdiction":"us","citation":"33 CFR 154.510","heading":"Loading arms.","body":"(a) Each mechanical loading arm used for transferring oil or hazardous material and placed into service after June 30, 1973, must meet the design, fabrication, material, inspection, and testing requirements in ANSI B31.3 (incorporated by reference; see § 154.106).\n(b) The manufacturer's certification that the standard in paragraph (a) of this section has been met must be permanently marked on the loading arm or recorded elsewhere at the facility with the loading arm marked to identify it with that information.\n(c) Each mechanical loading arm used for transferring oil or hazardous material must have a means of being drained or closed before being disconnected after transfer operations are completed.","path":["Title 33—Navigation and Navigable Waters","CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY","SUBCHAPTER O—POLLUTION","PART 154—FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK","Subpart C—Equipment Requirements"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-33.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:25:35Z","sha256":"54317eb1814f39878fb57cc1738b9e8143f8baad689012d764a01148597f3265","source_id":"us-cfr","stale":true,"prev":"us/33-cfr-154.500","next":"us/33-cfr-154.520"},"notice":"GroundRules: Original legal text. Not legal advice."}