{"data":{"id":"us/40-cfr-1065.320","jurisdiction":"us","citation":"40 CFR 1065.320","heading":"Fuel-flow calibration.","body":"(a) Calibrate fuel-flow meters upon initial installation. Follow the instrument manufacturer's instructions and use good engineering judgment to repeat the calibration.\n(b) [Reserved]\n(c) You may remove system components for off-site calibration. When installing a flow meter with an off-site calibration, we recommend that you consider the effects of the tubing configuration upstream and downstream of the flow meter. We recommend specifying calibration reference quantities that are NIST-traceable within ±0.5% uncertainty.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER U—AIR POLLUTION CONTROLS","PART 1065—ENGINE-TESTING PROCEDURES","Subpart D—Calibrations and Verifications"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"6d84e4163b9b734f1a3f760a5f87b0a89b52d36f8722948d1f078acbdf522ba3","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-1065.315","next":"us/40-cfr-1065.325"},"notice":"GroundRules: Original legal text. Not legal advice."}