{"data":{"id":"us/40-cfr-1090.935","jurisdiction":"us","citation":"40 CFR 1090.935","heading":"Reports by diesel fuel manufacturers.","body":"(a) Batch reporting. (1) For each compliance period, a diesel fuel manufacturer that produces ULSD must submit the following information:\n(i) The EPA-issued company and facility identifiers for the diesel fuel manufacturer.\n(ii) The highest sulfur content observed for a batch of ULSD produced during the compliance period on a company level, in ppm.\n(iii) The average sulfur concentration of all batches produced during the compliance period on a company level, in ppm.\n(iv) A list of all batches of ULSD that exceeded the sulfur standard in § 1090.305(b) by facility. For each such batch, report the following:\n(A) The batch number.\n(B) The date the batch was produced.\n(C) The volume of the batch, in gallons.\n(D) The sulfur content of the batch, in ppm.\n(E) The corrective action taken, if any.\n(b) [Reserved]","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER U—AIR POLLUTION CONTROLS","PART 1090—REGULATION OF FUELS, FUEL ADDITIVES, AND REGULATED BLENDSTOCKS","Subpart J—Reporting"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"326258cc96962c70a811619e923fbbbfce9225e5f151714ac1123245fdf57149","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-1090.930","next":"us/40-cfr-1090.1000"},"notice":"GroundRules: Original legal text. Not legal advice."}