{"data":{"id":"us/40-cfr-141.534","jurisdiction":"us","citation":"40 CFR 141.534","heading":"How does my system use this data to calculate an inactivation ratio?","body":"Use the tables in § 141.74(b)(3)(v) to determine the appropriate CT99.9 value. Calculate the total inactivation ratio as follows, and multiply the value by 3.0 to determine log inactivation of Giardia lamblia:\nIf your system * * * Your system must determine * * *\n(a) Uses only one point of disinfectant application (1) One inactivation ratio (CTcalc/CT99.9) before or at the first customer during peak hourly flow or\n(2) Successive CTcalc/CT99.9 values, representing sequential inactivation ratios, between the point of disinfectant application and a point before or at the first customer during peak hourly flow. Under this alternative, your system must calculate the total inactivation ratio by determining (CTcalc/CT99.9) for each sequence and then adding the (CTcalc/CT99.9) values together to determine (ΣCTcalc/CT99.9).\n(b) Uses more than one point of disinfectant application before the first customer The (CTcalc/CT99.9) value of each disinfection segment immediately prior to the next point of disinfectant application, or for the final segment, before or at the first customer, during peak hourly flow using the procedure specified in paragraph (a)(2) of this section.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER D—WATER PROGRAMS","PART 141—NATIONAL PRIMARY DRINKING WATER REGULATIONS","Subpart T—Enhanced Filtration and Disinfection—Systems Serving Fewer Than 10,000 People"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"cbd35aa9c51d580e9168bfbe5b4ca06aa020f8e968fdcc33f4d67ced24f699d7","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-141.533","next":"us/40-cfr-141.535"},"notice":"GroundRules: Original legal text. Not legal advice."}