{"data":{"id":"us/40-cfr-180.940","jurisdiction":"us","citation":"40 CFR 180.940","heading":"Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).","body":"Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.\n(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils.\nTable 1 to Paragraph (a)\nPesticide Chemical CAS Reg. No. Limits\nAcetal 105-57-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nacetaldehyde ethyl cis-3-hexenyl acetal 28069-74-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nAcetanisole 100-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nAcetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nAcetic acid, octyl ester 112-14-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nAcetoin 513-86-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nAcetophenone 98-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-acetyl-6-t-butyl-1,1-dimethylindan 13171-00-1 When ready for use, the end-use concentration is not to exceed 33 ppm\nAdipic acid 124-04-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nalcohols, C16-18, distn. residues 68603-17-8\n1190630-03-5\nalkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf 1430895-61-6\nalkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf 1430895-62-7\nAlkylbenzene sulfonates (branched and linear) of chain lengths C10-C16, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt 27176-87-0 25155-30-0 When ready for use, the end-use concentration is not to exceed 700 ppm\nAlkyl cylcohexylpropionate 2705-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; None\n68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5\nC10-C18-Alkyl dimethyl amine oxides 1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7 When ready for use, the end-use concentration is not to exceed 1,350 ppm\nAllspice oil (Pimenta officinalis Lindl.) 8006-77-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nallyl alpha-ionone 79-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nAllyl cinnamate 1866-31-5 When ready for use, the end-use concentration is not to exceed 33 ppm\nAllyl heptanoate 142-19-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nAllyl hexanoate 123-68-2 When ready for use, the end-use concentration is not to exceed 33 ppm\nAllyl propionate 2408-20-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nAluminum sulfate 10043-01-3 When ready for use, the end-use concentration is not to exceed 50 ppm\n2-propen-1-aminium, N,N-dimethyl-N-propenyl-, chloride, homopolymer 26062-79-3 When ready for use, the end-use concentration is not to exceed 0.6%\nAmmonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm\nAmyl butyrate 540-18-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nAmyl formate 638-49-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nAmyl hexanoate 540-07-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nAmylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate 113894-85-2 None\nAmylopectin, hydrogen 1-octadecenylbutanedioate 125109-81-1 None\np-Anisyl acetate 104-21-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nAnisyl formate 122-91-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nAnisyl propionate 7549-33-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nAspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt 144538-83-0 When ready for use, the end-use concentration is not to exceed 5000 ppm\nBalsam oil, Peru (Myroxylon pereirae Klotzsch) 8007-00-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzaldehyde 100-52-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzaldehyde, methyl- 1334-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzene, 1,2-dimethoxy- 91-16-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzene, 2-methoxy-4-methyl-1-(1-methylethyl)- 1076-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzeneacetaldehyde 122-78-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n1,3-Benzodioxole-5-carboxaldehyde 120-57-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nBenzoic acid 65-85-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzoin gum, Sumatra 9000-05-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzyl acetate 140-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzyl alcohol 100-51-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzyl benzoate 120-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzyl butyrate 103-37-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzyl cinnamate 103-41-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzyl formate 104-57-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzyl isobutyrate 103-28-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzyl propionate 122-63-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzyl salicylate 118-58-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nBenzyl trans-2-methyl-2-butenoate 37526-88-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzaldehyde, 4-methoxy- 123-11-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzenemethanol, alpha-methyl-, 1-acetate 93-92-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nbenzoic acid, ethyl ester 93-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nBicyclo(2.2.1)heptan-2-ol, 1,3,3-trimethyl- 1632-73-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nBicyclo(2.2.1)heptan-2-ol, 1,7,7-trimethyl-,propanoate, exo- 2756-56-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nBicyclo[2.2.1]heptan-2-one, 1,7,7-trimethyl-, (1R, 4R)- 464-49-3 When ready for use, the end-use concentration is not to exceed 33 ppm\nBicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene- 127-91-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nBisabolene 495-62-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione (CAS Reg. No. 123944-63-8) 0.5% by weight Dye, coloring agent\nBois de rose oil 8015-77-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nBorneol 507-70-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nendo-Bornyl acetate 76-49-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nButanoic acid, 1,1-dimethyl-2-phenylethyl ester 10094-34-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nButanoic acid, 3-methyl-, 2-methylpropyl ester 589-59-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nbutanoic acid, 3-oxo-, ethyl ester 141-97-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-buten-1-one, 1-(2,6,6-trimethyl-1,3-cyclohexadien-1-yl)- 23696-85-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-buten-2-one, 3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)- 127-51-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Buten-2-one, 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)- 14901-07-6; 79-77-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nButryic acid 107-92-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl acetate 123-86-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl alcohol 71-36-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl butyrate 109-21-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl butyryllactate 7492-70-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl isovalerate 109-19-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl sulfide 544-40-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nButyl 10-undecenoate 109-42-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nn-Butyl benzoate 136-60-7 When ready for use, the end-use concentration is not to exceed 15,000 ppm\nn-Butyl 2-methylbutyrate 15706-73-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nn-Butyl-3-hydroxybutyrate 53605-94-0 Solvent\nα-Butylcinnamaldehyde 7492-44-6 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-sec-Butylcyclohexanone 14765-30-1 When ready for use, the end-use concentration is not to exceed 33 ppm\nγ-Butyrolactone 96-48-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCadinene 29350-73-0; 523-47-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nCajeput oil (Melaleuca leucadendron L.) 8008-98-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nCalcium bisulfate When ready for use, the end-use concentration is not to exceed 2,000 ppm\nCalcium sulfate 7778-18-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nCamphene 79-92-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCamphor 21368-68-3 When ready for use, the end-use concentration is not to exceed 33 ppm\nCananga oil 68606-83-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nCapric (decanoic) acid 334-48-5 None\nCaprylic (octanoic) acid 124-07-2 None\nCardamom (Elettaria cardamomum (L.) Maton) 85940-32-5 When ready for use, the end-use concentration is not to exceed 33 ppm\nCardamom seed oil (Elettaria cardamomum (L.) Maton) 8000-66-6 When ready for use, the end-use concentration is not to exceed 33 ppm\nδ-3-Carene 13466-78-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nCarvacrol 499-75-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-Carvomenthenol 562-74-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nCarvyl acetate 97-42-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nβ-Caryophyllene 87-44-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCassia bark oil 8007-80-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCelery seed oil 8015-90-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nChamomile flower, Roman, oil (Anthemis nobilis L.) 8015-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamic acid; trans-Cinnamic acid 621-82-9; 140-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm\ncinnamic aldehyde 104-55-2 When ready for use, the end-use concentration is not to exceed 100 ppm\ncinnamic alcohol 104-54-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamon leaf oil 84649-98-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamyl acetate 103-54-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamyl benzoate 5320-75-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamyl cinnamate 122-69-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamyl formate 104-65-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamyl isobutyrate 103-59-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nCinnamyl propionate 103-56-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitral 5392-40-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitral dimethyl acetal 7549-37-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellal 106-23-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellol 106-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronelloxyacetaldehyde 7492-67-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellyl acetate 150-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellyl butyrate 141-16-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellyl formate 105-85-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellyl isobutyrate 97-89-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellyl propionate 141-14-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitronellyl tiglate 24717-85-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nCitrus, ext. 94266-47-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nClary oil (Salvia sclarea L.) 8016-63-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCloves (Eugenia spp.) 84961-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nCognac oil, green 8016-21-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCopper sulfate pentahydrate 7758-99-8 When ready for use, the end-use concentration is not to exceed 80 ppm\nCoriander oil (Coriandrum sativum L.) 8008-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nCornmint oil 68917-18-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCuminaldehyde 122-03-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nCurrant buds black absolute (Ribes nigrum L.) 68606-81-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nCyclohexadiene, methyl- 30640-46-1; 1888-90-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nCyclohexene, 1-methyl-4-(1-methylethylidene)- 586-62-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-Cyclohexylethanol 1193-81-3 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Cyclohexylethyl acetate 21722-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nCyclopentaneacetai acid, 3-oxo-2-pentyl-, methyl ester 24851-98-7 When ready for use, the end-use concentration is not to exceed 33 ppm\nCyclopropanemethanol, 1-methyl-2-[(1,2,2-trimethylbicyclo[3.1.0]hex-3-yl)methyl]- 198404-98-7 When ready for use, the end-use concentration is not to exceed 33 ppm\np-Cymene 99-87-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nβ-Damascone, (Z)- 23726-92-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nδ-decalactone 705-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-decalactone 706-14-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nε-Decalactone 5579-78-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nDecanal 112-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nDecanoic acid, 4-hydroxy-4-methyl-γ-lactone 7011-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-Decanol 112-30-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Decenal 3913-71-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n(E)-4-Decenal 65405-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-Decenal 30390-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n9-Decenal 39770-05-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nDecyl acetate 112-17-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nD-Glucopyranose, oligomeric, decyl octyl glycosides 68515-73-1 None\n1,3-dibromo-5,5-dimethylhydantoin 77-48-5 None\n1,1-diethoxy-3,7-dimethylocta-2,6-diene 7492-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm\ndiethyl malonate 105-53-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nDiethyl sebacate 110-40-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nDiethyl tartrate 87-91-2 When ready for use, the end-use concentration is not to exceed 100 ppm\ndihydro-beta-ionone 17283-81-7 When ready for use, the end-use concentration is not to exceed 100 ppm\ndihydrocarvyl acetate 20777-49-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nDiisobutyl ketone 108-83-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nm-Dimethoxybenzene 151-10-0 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Dimethoxybenzene 150-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6-Dimethoxyphenol 91-10-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n3,4-Dimethyl-1,2-cyclopentadione 13494-06-9 When ready for use, the end-use concentration is not to exceed 33 ppm\n3,7-Dimethyl-1-octanol 106-21-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,2-Dimethyl-1,3-dioxolane-4-methanol 100-79-8\n2,6-Dimethyl-4-heptanol 108-82-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6-Dimethyl-5-heptanal 106-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n3,7-Dimethyl-1,3,6-octatriene 13877-91-3 When ready for use, the end-use concentration is not to exceed 100 ppm\n3,7-Dimethyl-6-octenoic acid 502-47-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nDimethylbenzylcarbinyl acetate 151-05-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nDimethylcyclohex-3-ene-1-carbaldehyde 27939-60-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nα,α-Dimethylphenethyl alcohol 100-86-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,5-Dimethylpyrazine 123-32-0 When ready for use, the end-use concentration is not to exceed 33 ppm\n2,6-Dimethylpyrazine 108-50-9 When ready for use, the end-use concentration is not to exceed 33 ppm\np,α-Dimethylstyrene 1195-32-0 When ready for use, the end-use concentration is not to exceed 100 ppm\n6,10-Dimethylundeca-5,9-dien-2-one 689-67-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nDi-n-butyl carbonate 542-52-9 When ready for use, the end-use concentration is not to exceed 15,000 ppm\nDipropylene glycol 25265-71-8 None\n1-docosanol 661-19-8\nγ-Dodecalactone 2305-05-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nδ-Dodecalactone 713-95-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Dodecanol, (2E)- 20407-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Dodecenal 4826-62-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-eicosanol 629-96-9\nEthanol 64-17-5 None\nElemi oil (Canarium spp.) 8023-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl acetate 141-78-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl amyl ketone 106-68-3 When ready for use, the end-use concentration is not to exceed 33 ppm\nEthyl anthranilate 87-25-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-Ethylbenzaldehyde 4748-78-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl benzoylacetate 94-02-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl butyrate 105-54-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl cinnamate 103-36-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl (2E,4Z)-2,4-decadienoate 3025-30-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl decanoate 110-38-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl formate 109-94-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl heptanoate 106-30-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl hexanoate 123-66-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl 2-hexylacetoacetate 29214-60-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl 3-hydroxybutyrate 5405-41-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl isobutyrate 97-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl isovalerate 108-64-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl laurate 106-33-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl levulinate 539-88-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl maltol 4940-11-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nEthyl 2-methyl-3-pentenoate 1617-23-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl 2-methylbutyrate 452-79-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl 2-methylpentanoate 39255-32-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Ethyl-3-methylpyrazine 15707-23-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nEthyl nonanoate 123-29-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl octanoate 106-32-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl propionate 105-37-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nethyl salicylate 118-61-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl tiglate 5837-78-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nethylene brassylate 105-95-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None\n4-Ethylguaiacol 2785-89-9 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Ethylphenol 123-07-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl phenylacetate 101-97-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthyl 3-phenylpropionate 2021-28-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nEthylvanillin 121-32-4 When ready for use, the end-use concentration is not to exceed 33 ppm\nEucalyptus oil 8000-48-4 When ready for use, the end-use concentration is not to exceed 33 ppm\nEugenyl acetate 93-28-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nFD\u0026C Green No. 3 CAS Reg. No. 2353-45-9 None\nFD\u0026C Red No. 40 25956-17-6 When ready for use, the end-use concentration is not to exceed 20 ppm\nFD\u0026C Yellow No. 5 1934-21-0 When ready for use, the end-use concentration is not to exceed 1000 ppm\nα-Farnesene 125037-13-0; 502-61-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nFarnesol 4602-84-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nFarnesyl acetate 29548-30-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nFenchone 4695-62-9 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-Formyl-6,6-dimethylbicyclo(3.1.1)hept-2-ene 564-94-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nGalbanum oil (Ferula spp.) 8023-91-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranic acid 459-80-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n(E)-Geraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n(E)-Geraniol acetate 105-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl benzoate 94-48-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl butyrate 106-29-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl formate 105-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl isobutyrate 2345-26-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl phenylacetate 102-22-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl propionate 105-90-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nGeranyl tiglate 7785-33-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nC1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 500 ppm\nD-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None\nD-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None\nD-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) (CAS No. 595585-15-2) None\nglyceryl triacetate 102-76-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nGuaiacol 90-05-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nGuaiene 88-84-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nHelichrysum leaf oil (Helichrysum angustifolium) 8023-95-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Heptalactone 105-21-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nHeptanal 111-71-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nHeptanal, 2-(phenlymethylene)- 122-40-7 When ready for use, the end-use concentration is not to exceed 33 ppm\nHeptanoic acid 111-14-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Heptanol 543-49-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Heptanone 106-35-4 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-hepten-4-one, 5-methyl- 81925-81-7 When ready for use, the end-use concentration is not to exceed 100 ppm\ntrans-3-Heptenyl 2-methylpropanoate 67801-45-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nHeptyl acetate 112-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nHeptyl alcohol 111-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Hexalactone 695-06-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexanal 66-25-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,3-Hexanedione 3848-24-6 When ready for use, the end-use concentration is not to exceed 33 ppm\nHexanoic acid 142-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nn-Hexanol 111-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexadecanoic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexadecanoic acid, ethyl ester 628-97-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nω-6-Hexadecenlactone 7779-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,4-Hexadienyl isobutyrate 16491-24-0 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-Hexanol, 2-ethyl- 104-76-7 When ready for use, the end-use concentration is not to exceed 33 ppm\n1-Hexanol, 3,5,5-trimethyl- 3452-97-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Hexenal, (2E)- 6728-26-3 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Hexen-1-ol 2305-21-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Hexen-1-ol, (3Z)- 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n(E)-2-Hexen-1-yl acetate 2497-18-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n(Z)-3-Hexenol 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n(Z)-3-Hexenol acetate 3681-71-8 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-3-Hexenyl benzoate 25152-85-6 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-3-Hexenyl butyrate 16491-36-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n5-(cis-3-Hexenyl)dihydro-5-methyl-2(3H)furanone 70851-61-5 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-3-Hexenyl hexanoate 31501-11-8 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-3-Hexenyl isobutyrate 41519-23-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Hexenyl 2-methylbutanoate 10094-41-4 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-3-Hexenyl propionate 33467-74-2 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-3-Hexenyl tiglate 67883-79-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Hexenyl formate 9/5/2315 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl acetate 142-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl benzoate 6789-88-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl butyrate 2639-63-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl hexanoate 6378-65-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl isobutyrate 2349-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl 2-methylbutanoate 10032-15-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl octanoate 1117-55-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nHexyl propionate 2445-76-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Hexylcinnamaldehyde 101-86-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nHydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 91 ppm\n4-Hydroxy-2,5-dimethyl-3(2H)-furanone 3658-77-3 When ready for use, the end-use concentration is not to exceed 33 ppm\nHydroxycitronellal 107-75-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nHydroxycitronellal dimethyl acetal 141-92-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nHydroxycitronellol 107-74-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione 123944-63-8 When ready for use, the end-use concentration is not to exceed 300 ppm\nHydroxynonanoic acid, δ-lactone 3301-94-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-(p-hydroxyphenyl)-2-butanone 5471-51-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n5-hydroxyundecanoic acid lactone 710-04-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nHypochlorous acid 7790-92-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine.\nHypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine\nHyssop oil (Hyssopus officinalis L.) 8006-83-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n1H-Indole 120-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nIodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\nα-Ionone 127-41-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Ionone 79-76-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Irone 79-69-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl acetate 123-92-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl alcohol 123-51-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl benzoate 94-46-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl butyrate 106-27-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl cinnamate 7779-65-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl isovalerate 659-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl phenylacetate 102-19-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl propionate 105-68-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoamyl salicylate 87-20-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoborneol 124-76-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobornyl acetate 125-12-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl acetate 110-19-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl angelate 7779-81-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl benzoate 120-50-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl 2-butenoate 589-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl butyrate 539-90-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl cinnamate 122-67-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl isobutyrate 97-85-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Isobutyl-3-methoxypyrazine 24683-00-9 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol 5660-53-7\nIsobutyl phenylacetate 102-13-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyl salicylate 87-19-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Isobutylphenethyl alcohol 7779-78-4 When ready for use, the end-use concentration is not to exceed 33 ppm\nIsobutyraldehyde 78-84-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsobutyric acid 79-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoeugenol 97-54-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsoeugenyl acetate 93-29-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsojasmone 11050-62-7 When ready for use, the end-use concentration is not to exceed 33 ppm\nd,l-Isomenthone 491-07-6 When ready for use, the end-use concentration is not to exceed 33 ppm\niso-Methyl-β-ionone 79-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsopropyl acetate 108-21-4 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Isopropylacetophenone 645-13-6 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Isopropylbenzyl alcohol 536-60-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsopropyl-3-hydroxybutyrate 54074-94-1 Solvent\nIsopropyl 2-methylbutyrate 66576-71-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Isopropyl-4-methylthiazole 15679-13-7 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-Isopropylphenol 88-69-7 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Isopropyl phenylacetaldehyde 4395-92-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsopulegol 89-79-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nIsovaleric acid 503-74-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nJasmine lactone 25524-95-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nJasmine oil (Jasminum grandiflorum L.) 8022-96-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nJuniper oil (Juniperus communis L.) 8002-68-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nLabdanum oil (Cistus spp.) 8016-26-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nLactic acid (including l-lactic acid) 50-21-5, 79-33-4 When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places\nlaevo-Bornyl acetate 5655-61-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nLauryl acetate 112-66-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nLauric acid 143-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nLauric aldehyde 112-54-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nLauryl alcohol 112-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nLavandin oil (Lavandula hybrida) 8022-15-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nLevulinic acid 123-76-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nd-Limonene 5989-27-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalool 78-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalool acetate 115-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalool oxide 60047-17-8 When ready for use, the end-use concentration is not to exceed 33 ppm\n(E)-Linalool oxide 34995-77-2 When ready for use, the end-use concentration is not to exceed 33 ppm\n(Z)-Linalool oxide 5989-33-3 When ready for use, the end-use concentration is not to exceed 33 ppm\nLinalyl acetate 115-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl benzoate 126-64-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl cinnamate 78-37-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl formate 115-99-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl hexanoate 7779-23-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl isobutyrate 78-35-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl isovalerate 1118-27-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinalyl propionate 144-39-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nLinoleic acid, methyl ester 112-63-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nLipase, triacylglycerol 9001-62-1 When ready for use, the end-use concentration is not to exceed 500 ppm\nLovage oil (Levisticum officinale Koch) 8016-31-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nMace oil (Myristica fragrans Houtt.) 8007-12-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nMagnesium oxide 1309-48-4 None\nMagnesium sulfate anhydrous 7487-88-9 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMagnesium sulfate heptahydrate 10034-99-8 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMagnesium sulfate hexahydrate 7830-18-1 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMagnesium sulfate monohydrate 14168-73-1 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMagnesium sulfate pentahydrate 5553-21-6 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMagnesium sulfate tetrahydrate 24378-31-2 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMagnesium sulfate trihydrate 15320-30-6 When ready for use, the end-use concentration is not to exceed 4400 ppm\nMaltyl isobutyrate 65416-14-0 When ready for use, the end-use concentration is not to exceed 33 ppm\np-Mentha-1,8-dien-7-ol 536-59-4 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Mentha-1,8-dien-7-yl acetate 15111-96-3 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Mentha-8-thiol-3-one 38462-22-5 When ready for use, the end-use concentration is not to exceed 33 ppm\np-Menthan-3-one 10458-14-7 When ready for use, the end-use concentration is not to exceed 33 ppm\np-Menthane, 1,8-epoxy- 470-82-6 When ready for use, the end-use concentration is not to exceed 33 ppm\n1-p-Menthene-8-thiol 71159-90-5 When ready for use, the end-use concentration is not to exceed 33 ppm\nMenthol 15356-70-4; 89-78-1; 1490-04-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-Mercapto-4-methyl-2-pentanone 19872-52-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethane sulfonic acid 75-75-2 When ready for use, the end use concentration is not to exceed 5,000 ppm\n1H-3a,7-Methanoazulen-6-ol, octahydro-3,6,8,8-tetramethyl-,[3R-(3.α,3a.β,6.α,7.β,8aα)] 77-53-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methoxy-3-(1-methylpropyl)pyrazine 24168-70-5 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-methoxy-4-propylphenol 2785-87-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-Methoxy-2-methyl-2-butanethiol 94087-83-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methoxy-4-methylphenol 93-51-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n4-(p-Methoxyphenyl)-2-butanone 104-20-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methoxy-4-vinylphenol 7786-61-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm\nMethyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n4′-methylacetophenone 122-00-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl n-amyl ketone 110-43-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nMethyl anthranilate 134-20-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nalpha-methylbenzyl alcohol 98-85-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nmethyl benzoate 93-58-3 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Methyl-2-butenyl acetate 1191-16-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nalpha-methylcinnamaldehyde 101-39-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nmethyl cinnamate 103-26-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Methyl-1-cyclopentadecanone 541-91-3 When ready for use, the end-use concentration is not to exceed 33 ppm\nMethylcyclopentenolone 80-71-7 When ready for use, the end-use concentration is not to exceed 33 ppm\n3-Methylcrotonic acid 541-47-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl 3,7-dimethyl-6-octenoate 2270-60-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n6-Methyl-3,5-heptadien-2-one 1604-28-0 When ready for use, the end-use concentration is not to exceed 33 ppm\n6-Methyl-5-hepten-2-one 110-93-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nMethyl heptine carbonate 111-12-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl hexanoate 106-70-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl linolenate 301-00-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl 2-methylbutyrate 868-57-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methyl-3-(p-isopropylphenyl)propionaldehyde 103-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl N-acetylanthranilate 2719-08-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl anisate 121-98-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl N-methylanthranilate 85-91-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl 2-nonenoate 111-79-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl 2-nonynoate 111-80-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl 3-nonenoate 13481-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Methyl-2-(n-pentanyl)-2-cyclopenten-1-one 1128-08-1 When ready for use, the end-use concentration is not to exceed 33 ppm\n3-Methyl-2-(2E)-2-penten-1-yl-2-cyclopenten-1-one 6261-18-3 When ready for use, the end-use concentration is not to exceed 33 ppm\n3-Methyl-2-(2-pentenyl)-2-cyclopenten-1-one, (Z)- 488-10-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nMethyl phenethyl ether 3558-60-9 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-Methyl-4-phenyl-2-butanol 103-05-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n5-Methyl-2-phenyl-2-hexenal 21834-92-4 When ready for use, the end-use concentration is not to exceed 33 ppm.\np-Methylanisole 104-93-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethylbenzyl acetate (mixed o,m,p) 360676-70-1; 2216-45-7; 17373-93-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Methylbenzyl propionate 120-45-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Methyl-2-butenyl benzoate 5205-11-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Methylindole 83-34-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl-β-ionone 127-43-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl o-methoxybenzoate 606-45-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl 3-methylthiopropionate 13532-18-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methyloctanal 7786-29-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl octanoate 111-11-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methylpent-2-en-1-oic acid 3142-72-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nβ-Methylphenethyl alcohol 1123-85-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl phenylacetate 101-41-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methyl-4-phenyl-2-butyl acetate 103-07-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl n-propyl ketone 107-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methyl-4-propyl-1,3-oxathiane 67715-80-4 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-Methylpyrazine 109-08-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nmethyl salicylate 119-36-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl sulfide 75-18-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nMethyl tetradecanoate 124-10-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n5-Methyl-2-thiophenecarboxyaldehyde 13679-70-4 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-Methyl-trans-2-butenoic acid 80-59-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Methyl-5-(2,2,3-trimethyl-3-cyclopenten-1-yl)pent-4-en-2-ol 67801-20-1 When ready for use, the end-use concentration is not to exceed 33 ppm\nMethyl undec-10-enoate 111-81-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methylundecanal 110-41-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Methyl-1,3-propanediol 2163-42-0 None\nMusk ambrette 123-69-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nMyristaldehyde 124-25-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nMyristic acid 544-63-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nNerol oxide 1786-08-9 When ready for use, the end-use concentration is not to exceed 33 ppm\nNerolidiol 142-50-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nNeroli bigarde oil (Citrus aurantium L.) 8016-38-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nNerolidol (isomer unspecified) 7212-44-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nNeryl acetate 141-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nNeryl formate 2142-94-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nNitric acid 7697-37-2 When ready for use, the end-use concentration is not to exceed 1,000 ppm\nNona-2-trans-6-cis-dienal 557-48-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6-Nonadien-1-ol 7786-44-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6-Nonadienal diethyl acetal 67674-36-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n1,3-Nonanediol acetate (mixed esters) 1322-17-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Nonalactone 104-61-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nNonanal 124-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Nonanone 821-55-6 When ready for use, the end-use concentration is not to exceed 33 ppm\n6-nonenal, (6Z)- 2277-19-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Nonenal 2463-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-6-nonen-1-ol 35854-86-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nNonyl acetate 143-13-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nNonyl alcohol 143-08-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) None None\nNootkatone 4674-50-4 When ready for use, the end-use concentration is not to exceed 33 ppm\nOctadecanoic acid 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nOctadecanoic acid, calcium salt 1592-23-0 None\n1-octadecanol 112-92-5\n9-Octadecenoic acid (9Z)-, sulfonated, oxidized 1315321-93-7 When ready for use, the end-use concentration is not to exceed 250 ppm\n9-Octadecenoic acid (9Z)-, sulfonated, oxidized, potassium salts 1315321-94-8 When ready for use, the end-use concentration is not to exceed 250 ppm\n9-Octadecenoic acid (9Z)-, sulfonated, oxidized, sodium salts 1315321-95-9 When ready for use, the end-use concentration is not to exceed 250 ppm\n2,6-Octadien-1-ol, 3,7-dimethyl-,(Z)- 106-25-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Octalactone 104-50-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nδ-Octalactone 698-76-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nOctanal 124-13-0 When ready for use, the end-use concentration is not to exceed 100 ppm\noctanal dimethyl acetal 10022-28-3 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 46 ppm\n1-Octanol 111-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Octanone 111-13-7 When ready for use, the end-use concentration is not to exceed 33 ppm\n2,5,7-Octatrien-1-ol, 2,6-dimethyl0, 1-acetate 197098-61-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-Octen-3-ol 3391-86-4 When ready for use, the end-use concentration is not to exceed 33 ppm\n5-Octen-1-ol, (5Z)- 64275-73-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-Octen-3-yl acetate 2442-10-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nOil of Bergamot 8007-75-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nOil of camphor 8008-51-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nOil of citronella 8000-29-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nOil of orange 8008-57-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, clove 8000-34-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, Fir 8021-29-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, geranium 8000-46-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, ginger 8007-08-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, grapefruit 8016-20-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, lavender 8000-28-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, lemon, terpene-free 68648-39-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nOil of lemon 8008-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nOil of lemongrass 8007-02-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, lime 8008-26-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, mimosa 8031-03-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, orange, sweet, terpene-free 68606-94-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, palmarosa 8014-19-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, peppermint 8006-90-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, rosemary 8000-25-7 When ready for use, the end-use concentration is not to exceed 33 ppm\nOils, sage 8022-56-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nOils, spruce 8008-80-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nOils, thyme 8007-46-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nOleic acid 112-80-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nOleic acid, ethyl ester 111-62-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nOleyl alcohol 143-28-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nOlibanum oil (Boswellia spp.) 8016-36-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nOrange flower water absolute 8030-28-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nOriganum oil, Spanish 8007-11-2 When ready for use, the end-use concentration is not to exceed 33 ppm\nOrris absolute (Iris pallida) 8002-73-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nOrtho-benzyl-para-chlorophenol 120-32-1 When ready for use, the end-use concentration is not to exceed 2080 ppm\n7-Oxabicyclo(2.2.1.)heptane, 1-methyl-4-(1-methylethyl)- 470-67-7 When ready for use, the end-use concentration is not to exceed 33 ppm\nOxacycloheptadec-10-ene-2-one 28645-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nOxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None\nPalmitic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nParaffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts 8002-74-2; 68153-22-0; 68649-48-9\nPelargonic (nonanoic) acid 112-05-0 None\nω-Pentadecalactone 106-02-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-pentanol 71-41-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nPepper, black, oil (Piper nigrum L.) 8006-82-4 When ready for use, the end-use concentration is not to exceed 100 ppm\npeppermint (Mentha piperita) ext. 84082-70-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nPeroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 58 ppm\nPeroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 52 ppm\nPetitgrain bigarade oil 8014-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nPetitgrain Paraguay oil 8014-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Phellandrene 99-83-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nphenethyl acetate 103-45-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl butyrate 103-52-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl cinnamate 103-53-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl formate 104-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl hexanoate 6290-37-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl propionate 122-70-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl salicylate 87-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenethyl tiglate 55719-85-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenol, 2-methoxy-4-(2-propenyl)- 97-53-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenol, 2,4,6-trimethyl- 527-60-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nphenyl ethyl alcohol 60-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nphenethyl isobutyrate 103-48-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nphenethyl phenylacetate 102-20-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nphenylacetaldehyde dimethyl acetal 101-48-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenylacetaldehyde glyceryl acetal 29895-73-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenylacetic acid 103-82-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhenylethyl isoamyl ether 56011-02-0 When ready for use, the end-use concentration is not to exceed 33 ppm\n2-phenylethyl 2-methylbutyrate 24817-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Phenylpropionaldehyde 104-53-0 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Phenylpropionic acid 501-52-0 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Phenylpropyl acetate 122-72-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-Phenylpropyl cinnamate 122-68-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n3-phenyl-1-propanol 122-97-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Phenylpropionaldehyde 93-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Phenylpropionaldehyde dimethyl acetal 90-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nPhosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 14 ppm\nPhosphoric acid 7664-38-2\nPhosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm\nPine needle oil 8000-26-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nPine scotch oil (Pinus sylvestris L.) 8023-99-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Pinene 80-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nPiperonyl acetate 326-61-4 When ready for use, the end-use concentration is not to exceed 33 ppm\nPolyammonium bisulfate 10043-02-4 When ready for use, the end-use concentration is not to exceed 250 ppm\nPotassium 2-benzyl-4-chlorophenate 35471-49-9 When ready for use, the end-use concentration is not to exceed 2080 ppm\nPotassium bromide 7758-02-3 When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen\nPotassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\n1,3-Propanediol 504-63-2 None\npropanoic acid, 2-methyl-, 4-formyl-2-methoxyphenyl ester 20665-85-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nPropanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nPropenylguaethol 94-86-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nPropionic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nPropyl phenethyl acetal 7493-57-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nPropylene glycol 57-55-6 None\nα-Propylphenethyl alcohol 705-73-7 When ready for use, the end-use concentration is not to exceed 100 ppm\no-Propylphenol 644-35-9 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Propylphenol 645-56-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n4H-Pyran-4-one, 3-hydroxy-2-methyl- 118-71-8 When ready for use, the end-use concentration is not to exceed 33 ppm\n2,6-Pyridinedicarboxylic acid 499-83-2 When ready for use, the end-use concentration is not to exceed 2 ppm\nPyruvic acid 127-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nQuaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound\nQuaternary ammonium compounds: n-alkyl (C12-18) dimethyl benzyl ammonium chloride 68424-85-1 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound\nQuaternary Ammonium Compounds: n-alkyl (C 12-14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 85409-23-0 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound\nQuaternary ammonium compounds n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound\nQuaternary ammonium compounds, Di-n-Alkyl (C8-10) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361 None When ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound\nQuaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate 148788-55-0/148812-654-1 When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound\nRice bran wax 8016-60-2 None\nRose absolute (Rosa spp.) 8007-01-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nRue oil (Ruta graveolens L.) 8014-29-7 When ready for use, the end-use concentration is not to exceed 33 ppm\nSalicylaldehyde 90-02-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nSandalwood yellow oil (Santalum album L.) 8006-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nSantalol 11031-45-1 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-α-Santalol 115-71-9 When ready for use, the end-use concentration is not to exceed 100 ppm\ncis-β-Santalol 77-42-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nSchinus molle oil (Schinus molle L.) 68917-52-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nSclareol 515-03-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nSilver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver) 14701-21-4 When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver\nSodium 2-benzyl-4-chlorophenate 3184-65-4 When ready for use, the end-use concentration is not to exceed 2080 ppm\nSodium bisulfate 7681-38-1 When ready for use, the end-use concentration is not to exceed 2,000 ppm\nSodium dioctyl sulfosuccinate 577-11-7 None\nSodium lauroyl sarcosinate 137-16-6 When ready for use, the end-use concentration is not to exceed 10,000 ppm\nSorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)- 9005-65-6 None\nSpike lavender oil (Lavandula spp.) 8016-78-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nStearic acid 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nStorax (Liquidambar spp.) 8046-19-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nSulfonic acids, C14-16-alkane hydroxy and C14-16-alkene, sodium salts 68439-57-6 When ready for use, the end-use concentration is not to exceed 1%\nSulfuric acid 7664-93-9 Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm\nSulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm\nTagetes oil (Tagetes erecta L.) 8016-84-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nTall oil fatty acid (CAS Reg. No. 61790-12-3) Solvent/carrier\nTangerine oil (Citrus reticulata blanco) 8008-31-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nTartaric acid 87-69-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nDL-Tartaric acid 133-37-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Terpinene 99-86-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Terpinene 99-85-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nα-Terpineol 98-55-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nTerpinyl acetate (isomer mixture) 8007-35-0 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-tetradecanol 112-72-1\nα-Terpinyl propionate 80-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nTetraacetylethylenediamine (TAED) 10543-57-4 None\nTetradecanoic acid, ethyl ester 124-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nTetradecanoic acid, 1-methylethyl ester 110-27-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nTetrahydrogeranial 5988-91-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nTetrahydrolinalool 78-69-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nTetrahydro-4-methyl-2-(2-methylpropen-1-yl)pyran 16409-43-1 When ready for use, the end-use concentration is not to exceed 33 ppm\nTetrahydro-6-(3-pentenyl)-2H-pyran-2-one 32764-98-0 When ready for use, the end-use concentration is not to exceed 33 ppm\nTheaspirane 36431-72-8 When ready for use, the end-use concentration is not to exceed 33 ppm\nThiogeraniol 39067-80-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nthymol (8CA) 89-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nThyme (Thymus Vulgaris) Oil 84929-51-1 When ready for use, the end-use concentration is not to exceed 100 ppm\nTolu, balsam, gum (Myroxylon spp.) 9000-64-0 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Tolylacetaldehyde 104-09-6 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Tolyl acetate 140-39-6 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Tolyl isobutyrate 103-93-5 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Tolyl 3-methylbutyrate 55066-56-3 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Tolyl octanoate 59558-23-5 When ready for use, the end-use concentration is not to exceed 100 ppm\np-Tolyl phenylacetate 101-94-0 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-(p-Tolyl)propionaldehyde 99-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nTrans-1,3,3,3-tetrafluoroprop-1-ene 29118-24-9 None\n1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine\n2-Tridecanal 7774-82-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n2-Tridecanone 593-08-8 When ready for use, the end-use concentration is not to exceed 33 ppm\ntriethyl citrate 77-93-0 When ready for use, the end-use concentration is not to exceed 100 ppm\nTriethylene glycol 112-27-6 None\np-α,α-Trimethylbenzyl alcohol 1197-01-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6,6-Trimethyl-1-cyclohexen-1-acetaldehyde 472-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6,6-Trimethyl-1\u00262-cyclohexen-1-carboxaldehyde 432-25-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n1,3,3-trimethyl-2-norbornanyl acetate 13851-11-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n3,3,5-Trimethylcyclohexanol 116-02-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n(Z)-β-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one; (2E)-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one 35044-68-9; 23726-92-3; 23726-91-2 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,3,6-Trimethylphenol 2416-94-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n4,7,7-Trimethyl-6-thiabicyclo[3.2.1]octane 68398-18-5 When ready for use, the end-use concentration is not to exceed 100 ppm\ndelta-1-(2,6,6-trimethyl-3-cyclohexen-1-yl)-2-buten-1-one 57378-68-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n3,5,5-Trimethylhexanal 5435-64-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nTurpentine, oil 8006-64-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Undecalactone 104-67-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nUndecanal 112-44-7 When ready for use, the end-use concentration is not to exceed 100 ppm\n1-undecanol 112-42-5 Carrier/Adjuvant and Coating Agent/Binder\n2-Undecanone 112-12-9 When ready for use, the end-use concentration is not to exceed 33 ppm\n1,3,5-Undecatriene 16356-11-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n9-Undecenal 143-14-6 When ready for use, the end-use concentration is not to exceed 100 ppm\n10-Undecenal 112-45-8 When ready for use, the end-use concentration is not to exceed 100 ppm\n10-Undecenoic acid 112-38-9 When ready for use, the end-use concentration is not to exceed 100 ppm\n10-Undecenoic acid, ethyl ester 692-86-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n10-undecen-1-yl acetate 112-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm\nUndecyl alcohol 112-42-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nValencene 4630-07-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nValeraldehyde 110-62-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nValeric acid 109-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nγ-Valerolactone 108-29-2 When ready for use, the end-use concentration is not to exceed 100 ppm\nVanilla (Vanilla spp.) 8024-06-4 When ready for use, the end-use concentration is not to exceed 100 ppm\nVanilla extract (Vanilla spp.) 84650-63-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nVanilla tahitensis, ext. 94167-14-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nVanillin 121-33-5 When ready for use, the end-use concentration is not to exceed 100 ppm\nveratraldehyde 120-14-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nViolet leaves absolute (Viola odorata L.) 90147-36-7 When ready for use, the end-use concentration is not to exceed 100 ppm\nWaxes and waxy substances, rice bran, oxidized 1883583-80-9 None\nWintergreen oil 68917-75-9 When ready for use, the end-use concentration is not to exceed 100 ppm\nXylenesulfonic acid, sodium salt 1300-72-7 When ready for use, the end-use concentration is not to exceed 500 ppm\n2,5-Xylenol 95-87-4 When ready for use, the end-use concentration is not to exceed 100 ppm\n2,6-Xylenol 576-26-1 When ready for use, the end-use concentration is not to exceed 100 ppm\n3,4-Xylenol 95-65-8 When ready for use, the end-use concentration is not to exceed 100 ppm\nYlang-ylang oils 8006-81-3 When ready for use, the end-use concentration is not to exceed 100 ppm\nZingerone 122-48-5 When ready for use, the end-use concentration is not to exceed 100 ppm\n(b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.\nTable 2 to Paragraph (b)\nPesticide Chemical CAS Reg. No. Limits\nAcetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1200 ppm\nAcetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid\nButanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm\nButoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None\nCalcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm\nn-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm\nEthanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm\nEthylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm\nFD\u0026C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None\nC1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 1,000 ppm\nD-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None\nD-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None\nD-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm\nHydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine\nHydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 465 ppm\nIodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\n1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm\n1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm\n1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm\n1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 297 ppm\n1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm\nOxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)\nPeroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm\nPeroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm\nPhosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm\nPhosphoric acid 7664-38-2 None\nPhosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm\nPotassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\nPropanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm\nSulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm\n(c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-processing equipment and utensils.\nTable 3 to Paragraph (c)\nPesticide Chemical CAS Reg. No. Limits\nAcetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1,200 ppm\nAcetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid\nAmmonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm\n[1,1′-Biphenyl]-2-ol 90-43-7 When ready for use, the end-use concentration is not to exceed 400 ppm\nBoric acid, sodium salt 7775-19-1 None\nButanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm\nButanedioic acid, sulfo-, 1,4-dioctyl ester, sodium salt 1639-66-3 None\nButoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100o C in 0.5 aqueous solution, average molecular weight (in amu), 3300 None None\nButoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None\nCalcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm\nn-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm\n3-Cyclohexene-1-methanol,α,α,4-trimethyl- 98-55-5 None\n1-Decanaminium, N-decyl-N, N-dimethyl-, chloride 7173-51-5 When ready for use, the end-use concentration is not to exceed 200 ppm of active quaternary compound\nEthanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm\nEthanol 64-17-5 None\nEthanol, 2 butoxy- 111-76-2 None\nEthanol, 2-(2-ethoxyethoxy)- 111-90-0 None\nEthylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm\nEthylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None\nFatty acids, coco, potassium salts 61789-30-8 None\nFatty acids, tall-oil, sulfonated, sodium salts 68309-27-3 When ready for use, the end-use concentration is not to exceed 66 ppm\nFD\u0026C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None\nD-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm\nHydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\nHydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 1100 ppm\nHypochlorous acid, calcium salt 7778-54-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine\nHypochlorous acid, lithium salt 13840-33-0 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium\nHypochlorous acid, potassium salt 7778-66-7 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine\nHypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine\nIodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\nMagnesium oxide 1309-48-4 None\nMethylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm\nNeodecanoic acid 26896-20-8 When ready for use, the end-use concentration is not to exceed 174 ppm\nα-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748 None None\nα-(p-Nonylphenol)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles None None\nα-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p-nonylphenol with 9 to 12 moles ethylene oxide None None\nα-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxide None None\nOctadecanoic acid, calcium salt 1592-23-0 None\n9-Octadecenoic acid (9Z)-, sulfonated 68988-76-1 When ready for use, the end-use concentration is not to exceed 312 ppm\n9-Octadecenoic acid (9Z)-sulfonated, sodium salts 68443-05-0 When ready for use, the end-use concentration is not to exceed 200 ppm\n1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm\n1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm\n1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm\n1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 312 ppm\n1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm\nOxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None\nOxirane, methyl-, polymer with oxirane, block, average molecular weight (in amu), 1900 106392-12-5 None\nOxirane, methyl-, polymer with oxirane, block, minimum average molecular weight (in amu), 2000 None None\nOxirane, methyl-, polymer with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000 None None\nOxychloro species (predominantly chlorite, chlorate and chlorine dioxide in an equilibrium mixture) generated either (i) by directly metering a concentrated chlorine dioxide solution prepared just prior to use, into potable water, or (ii) by acidification of an aqueous alkaline solution of oxychloro species (predominately chlorite and chlorate) followed by dilution with potable water None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)”\nOxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)”\n2,4-Pentanediol, 2-methyl- 107-41-5 None\nPeroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm\nPeroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm\nPhenol, 4-(1,1-dimethylpropyl)- 80-46-6 When ready for use, the end-use concentration is not to exceed 80 ppm\nPhosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm\nPhosphoric acid 7664-38-2 None\nPhosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm\nPhosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm\nPoly(oxy-1,2-ethanediyl), α-[(1,1,3,3-tetramethylbutyl) phenyl]-ω-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxide None None\nPotassium bromide 7758-02-3 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen\nPotassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\nPropanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm\nQuaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound\nQuaternary ammonium compounds, n-alkyl (C12-C14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound\nQuaternary ammonium compounds, n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound\nQuaternary ammonium compounds, di-n-Alkyl (C8-C10) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound\nSodium-α-alkyl(C12-C15)-ω-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole None None\nSodium bromide 7647-15-6 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen\nSodium iodide 7681-82-5 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine\nSulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 None\n1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro- 2782-57-2 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine\n1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, potassium salt 2244-21-5 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine\n1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When r use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine\n1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-trichloro- 87-90-1 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine\n1,3,5-Triazine, N,N′,N″-trichloro-2,4,6-triamino- 7673-09-8 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER E—PESTICIDE PROGRAMS","PART 180—TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD","Subpart D—Exemptions From Tolerances"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"2b74738d7ef7a8e53a5eb5d289a6573caf7f1dc9632ff858e9d7b9cbd2d3be59","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-180.930","next":"us/40-cfr-180.950"},"notice":"GroundRules: Original legal text. Not legal advice."}