{"data":{"id":"us/40-cfr-211.212-8","jurisdiction":"us","citation":"40 CFR 211.212-8","heading":"-8 Relabeling requirements.","body":"(a) Any manufacturer who is found to not conform with § 211.212-6, and who has met the requirement of § 211.212-7, must relabel all protectors of the specified category already in his possession according to § 211.211 before distributing them in commerce. The manufacturer shall relabel at values no greater than any mean attenuation values received from Compliance Audit Testing. Any manufacturer who proceeds with § 211.212-7(a) or (b) must relabel his product line with the lowest mean attenuation value at each octave band received from testing; or he may take into account product variability under § 211.211(b) and label with a lower mean attenuation value than the worst case values obtained from Compliance Audit Testing.\n(b) [Reserved]","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER G—NOISE ABATEMENT PROGRAMS","PART 211—PRODUCT NOISE LABELING","Subpart B—Hearing Protective Devices"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"d23e33fb9c0cef4fb45ee91786b5d35cdce09a92cabf9557b04ddeb77d2e3bf3","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-211.212-7","next":"us/40-cfr-211.213"},"notice":"GroundRules: Original legal text. Not legal advice."}