{"data":{"id":"us/40-cfr-426.12","jurisdiction":"us","citation":"40 CFR 426.12","heading":"Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.","body":"The following limitations establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:\n(a) There shall be no discharge of process waste water pollutants to navigable waters, except as permitted in paragraph (b) of this section.\n(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged in process waste water from advanced air emission control devices, when such water cannot be consumed in the process.\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kilograms per 1,000 kg of product)\nPhenol 0.0006 0.0003\nCOD 0.33 .165\nBOD5 0.024 .012\nTSS 0.03 .015\npH (1) (1)\nEnglish units (pounds per 1,000 lb. of product)\nPhenol 0.0006 0.0003\nCOD 0.33 .165\nBOD5 0.024 .012\nTSS 0.03 .015\npH (1) (1)\n1 Within the range 6.0 to 9.0.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 426—GLASS MANUFACTURING POINT SOURCE CATEGORY","Subpart A—Insulation Fiberglass Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"687ccf13c8752b4ab7da64d879cd5a5ed737f78cce7f36fa9c1a0354fb8a161c","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-426.11","next":"us/40-cfr-426.13"},"notice":"GroundRules: Original legal text. Not legal advice."}