{"data":{"id":"us/40-cfr-428.102","jurisdiction":"us","citation":"40 CFR 428.102","heading":"Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.","body":"Except as provided in §§ 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):\n(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available:\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of raw material)\nOil and grease 2.0 0.73\nBOD5 3.72 2.20\nTSS 6.96 2.90\npH (1) (1)\nEnglish units (lb/1,000 lb of raw material)\nOil and grease 2.0 0.73\nBOD5 3.72 2.20\nTSS 6.96 2.90\npH (1) (1)\n1 Within the range 6.0 to 9.0.\n(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to plants employing the chromic acid form-cleaning operation, by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by § 428.102(a):\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of raw material)\nChromium 0.0086 0.0036\nEnglish units (lb/1,000 lb of raw material)\nChromium 0.0086 0.0036","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY","Subpart J—Latex-Dipped, Latex-Extruded, and Latex-Molded Rubber Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"b8e4bfac1dcba79d3aa990c47541e0f55485ed46243296134c5b2019b25bb169","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-428.101","next":"us/40-cfr-428.103"},"notice":"GroundRules: Original legal text. Not legal advice."}