{"data":{"id":"us/40-cfr-428.23","jurisdiction":"us","citation":"40 CFR 428.23","heading":"Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.","body":"The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of product)\nCOD 3.12 2.08\nBOD5 0.12 .08\nTSS 0.24 .16\nOil and grease 0.12 .08\npH (1) (1)\nEnglish units (lb/1,000 lb of product)\nCOD 3.12 2.08\nBOD5 0.12 .08\nTSS 0.24 .16\nOil and grease 0.12 .08\npH (1) (1)\n1 Within the range 6.0 to 9.0.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY","Subpart B—Emulsion Crumb Rubber Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"bbafbf85255ef55aa3252e8e3020bf547102e69335d292896695108f1a1a6d59","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-428.22","next":"us/40-cfr-428.24"},"notice":"GroundRules: Original legal text. Not legal advice."}