{"data":{"id":"us/40-cfr-428.65","jurisdiction":"us","citation":"40 CFR 428.65","heading":"Standards of performance for new sources.","body":"(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of raw material)\nOil and grease 0.42 0.15\nTSS 0.80 0.40\npH (1) (1)\nEnglish units (lb/1,000 lb of raw material)\nOil and grease 0.42 0.0\nTSS 0.80 0.4\npH (1) (1)\n1 Within the range 6.0 to 9.0.\n(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.65(a):\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of raw material)\nLead 0.0017 0.0007\nEnglish units (lb/1,000 lb of raw material)\nLead 0.0017 0.0007","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY","Subpart F—Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"c93174d3c669fc8e6f795e2d9df88550ecb7473cb39a3cc07ae8234ba78f7346","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-428.64","next":"us/40-cfr-428.66"},"notice":"GroundRules: Original legal text. Not legal advice."}