{"data":{"id":"us/40-cfr-428.86","jurisdiction":"us","citation":"40 CFR 428.86","heading":"Pretreatment standards for new sources.","body":"Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:\nPollutant or pollutant property Pretreatment standards\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of product)\nCOD 14.7 6.11\nOil and grease (1) (1)\nTSS (2) (2)\npH (2) (2)\nEnglish units (lb/1,000 lb of product)\nCOD 14.7 6.11\nOil and grease (1) (1)\nTSS (2) (2)\npH (2) (2)\n1 100 mg/l.\n2 No limitation.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY","Subpart H—Wet Digestion Reclaimed Rubber Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"72d66982bddd887df0dceec845fb35bb72ef6b3644fc77cb4872060ecccc46b6","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-428.85","next":"us/40-cfr-428.90"},"notice":"GroundRules: Original legal text. Not legal advice."}