{"data":{"id":"us/40-cfr-428.95","jurisdiction":"us","citation":"40 CFR 428.95","heading":"Standards of performance for new sources.","body":"(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of product)\nOil and grease 0.40 0.144\nTSS 0.384 0.192\npH (1) (1)\nEnglish units (lb/1,000 lb of product)\nOil and grease 0.40 0.144\nTSS 0.384 0.192\npH (1) (1)\n1 Within the range 6.0 to 9.0.\n(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed rubber process, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.95:\nEffluent characteristic Effluent limitations\nMaximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—\nMetric units (kg/kkg of product)\nCOD 6.7 2.8\nEnglish units (lb/1,000 lb of product)\nCOD 6.7 2.8","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 428—RUBBER MANUFACTURING POINT SOURCE CATEGORY","Subpart I—Pan, Dry Digestion, and Mechanical Reclaimed Rubber Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"bb1f58410883ead23efedcbe023576412e15dfc63f86e38c213f95edabb1bddd","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-428.94","next":"us/40-cfr-428.96"},"notice":"GroundRules: Original legal text. Not legal advice."}