{"data":{"id":"us/40-cfr-443.26","jurisdiction":"us","citation":"40 CFR 443.26","heading":"Pretreatment standard for new sources.","body":"Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new source subject to the provisions of this subpart:\nPollutant or pollutant property Pretreatment standard\nBOD5 No limitation.\nTSS Do.\npH Do.\nOil and grease 100 mg/l.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 443—EFFLUENT LIMITATIONS GUIDELINES FOR EXISTING SOURCES AND STANDARDS OF PERFORMANCE AND PRETREATMENT STANDARDS FOR NEW SOURCES FOR THE PAVING AND ROOFING MATERIALS (TARS AND ASPHALT) POINT SOURCE CATEGORY","Subpart B—Asphalt Concrete Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"949d5476f9cca8f12a6077808e4b2e3a8770eb7df3918e2bfdaa2b4ac33c9ef2","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-443.25","next":"us/40-cfr-443.30"},"notice":"GroundRules: Original legal text. Not legal advice."}