{"data":{"id":"us/40-cfr-463.14","jurisdiction":"us","citation":"40 CFR 463.14","heading":"New source performance standards.","body":"(a) NSPS for bis(2-ethylhexyl) phthalate are reserved.\n(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the contact cooling and heating water processes at a new source times the following pollutant concentrations:\nSubpart A\n[Contact cooling and heating water]\nConcentration used to calculate NSPS\nPollutant or pollutant property Maximum for any 1 day (mg/l)\nBOD5 26\nOil and grease 29\nTSS 19\npH (1)\n1 Within the range of 6.0 to 9.0 at all times.\nThe permit authority will obtain the average process water usage flow rate for the new source contact cooling and heating water processes from the permittee.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS","PART 463—PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY","Subpart A—Contact Cooling and Heating Water Subcategory"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"9d9ec34f1ddaf0cfee53cb4ab158ae59d79107d558f4d9ad94e304348aa61f8c","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-463.13","next":"us/40-cfr-463.15"},"notice":"GroundRules: Original legal text. Not legal advice."}