{"data":{"id":"us/40-cfr-63.2267","jurisdiction":"us","citation":"40 CFR 63.2267","heading":"Initial compliance demonstration for a reconstituted wood product press or board cooler.","body":"If you operate a reconstituted wood product press at a new or existing affected source or a reconstituted wood product board cooler at a new affected source, then you must either use a wood products enclosure as defined in § 63.2292 or measure the capture efficiency of the capture device for the press or board cooler using Methods 204 and 204A through 204F of 40 CFR part 51, appendix M (as appropriate), or using the alternative tracer gas method contained in appendix A to this subpart. You must submit documentation that the wood products enclosure meets the press enclosure design criteria in § 63.2292 or the results of the capture efficiency verification with your Notification of Compliance Status.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart DDDD—National Emission Standards for Hazardous Air Pollutants: Plywood and Composite Wood Products"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"7ff0f93bac496d097ccc9a263c27a0a69465ea4a251b355bca522865507a5ccb","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-63.2266","next":"us/40-cfr-63.2268"},"notice":"GroundRules: Original legal text. Not legal advice."}