{"data":{"id":"us/40-cfr-63.5360","jurisdiction":"us","citation":"40 CFR 63.5360","heading":"How do I demonstrate continuous compliance with the emission standards?","body":"(a) You must demonstrate continuous compliance with the emission standards in § 63.5305 by following the requirements in paragraphs (a)(1) and (2) of this section:\n(1) You must collect and monitor data according to the procedures in your plan for demonstrating compliance as specified in § 63.5325.\n(2) If you use an emission control device, you must comply with § 63.982(a)(2) (subpart SS of this part) and collect the monitoring data as specified therein.\n(3) You must maintain your compliance ratio less than or equal to 1.00, as specified at § 63.5330.\n(b) You must report each instance in which you did not meet the emission standards in § 63.5305. These deviations must be reported according to the requirements in § 63.5420(b).\n(c) You must conduct the initial compliance demonstration before the compliance date that is specified for your source in § 63.5295.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart TTTT—National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"1c75c544105b658c739f4356b7d9e51ad7d301cfeb0bd45b4c76f368d8b0f684","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-63.5355","next":"us/40-cfr-63.5375"},"notice":"GroundRules: Original legal text. Not legal advice."}