{"data":{"id":"us/40-cfr-63.5715","jurisdiction":"us","citation":"40 CFR 63.5715","heading":"What operating limits must I meet?","body":"(a) For open molding operations on which you use a thermal oxidizer as an add-on control device, you must meet the operating limits specified in Table 4 to this subpart that apply to the emission capture system and thermal oxidizer. You must establish the operating limits during the performance test according to the procedures in § 63.5725. You must meet the operating limits at all times after you establish them.\n(b) If you use an add-on control device other than a thermal oxidizer, or wish to monitor an alternative parameter and comply with a different operating limit, you must apply to the Administrator for approval of alternative monitoring under § 63.8(f).","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart VVVV—National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"82b1be63fe8dc58fc2eb9008712c7bf2b04972528e5dcffd60ce30e35a57037a","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-63.5714","next":"us/40-cfr-63.5716"},"notice":"GroundRules: Original legal text. Not legal advice."}