{"data":{"id":"us/40-cfr-63.5988","jurisdiction":"us","citation":"40 CFR 63.5988","heading":"What emission limitations must I meet for puncture sealant application affected sources?","body":"(a) You must meet each emission limit in either option 1 or option 2 of table 3 to this subpart that applies to you.\n(b) If you use an add-on control device to meet the emission limits in table 3 to this subpart, you must also meet each operating limit in table 4 to this subpart that applies to you.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart XXXX—National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"0cfa1798e83bb6321fcbbbefcb9b4b867c89900fa9215d617e38cb9a00610f8b","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-63.5987","next":"us/40-cfr-63.5989"},"notice":"GroundRules: Original legal text. Not legal advice."}