{"data":{"id":"us/40-cfr-711.15","jurisdiction":"us","citation":"40 CFR 711.15","heading":"Reporting information to EPA.","body":"Any person who must report under this part, as described in § 711.8, must submit the information described in this section for each chemical substance described in § 711.5 that the person manufactured (including imported) for commercial purposes in an amount of 25,000 lb (11,340 kg) or more (or in an amount of 2,500 lb (1,134 kg) or more for chemical substances subject to the rules, orders, or actions described in § 711.8(b)) at any one site during any calendar year since the last principal reporting year (e.g., for the 2020 submission period, consider calendar years 2016, 2017, 2018, and 2019, because 2015 was the last principal reporting year). The principal reporting year for each submission period is the previous calendar year (e.g., the principal reporting year for the 2020 submission period is calendar year 2019). For all submission periods, a separate report must be submitted for each chemical substance at each site for which the submitter is required to report. A submitter of information under this part must report information as described in this section to the extent that such information is known to or reasonably ascertainable by that person.\n(a) Reporting information to EPA. Any person who reports information to EPA must complete a Form U using the e-CDRweb reporting tool provided by EPA at the address set forth in § 711.35. The submission must include all information described in paragraph (b) of this section. Persons must submit the chemical reports on a separate single Form U for each site for which the person is required to report. The e-CDRweb reporting tool is described in the instructions available from EPA at the website set forth in § 711.35.\n(b) Information to be reported. The information described in paragraphs (b)(1) through (4) of this section must be reported for each chemical substance manufactured (including imported) in an amount of 25,000 lb (11,340 kg) or more (or in an amount of 2,500 lb (1,134 kg) or more for chemical substances subject to the rules, orders, or actions described in § 711.8(b)) at any one site during any calendar year since the last principal reporting year. The requirement to report information described in paragraph (b)(4) of this section is subject to exemption as described in § 711.6.\n(1) A certification statement signed and dated by an authorized official of the submitter company. The authorized official must certify that the submitted information has been completed in compliance with the requirements of this part and that the confidentiality claims made on the Form U are true and correct. The certification must be signed and dated by the authorized official for the submitter company, and provide that person's name, official title, and email address.\n(2) Company and site information. The following currently correct parent company and site information at the date of CDR submission must be reported for each site at which a reportable chemical substance is manufactured (including imported) above the applicable production volume threshold, as described in this section (see § 711.3 for the “site” for importers and special situations).\n(i) The legal name, address, and Dun and Bradstreet D-U-N-S® (D\u0026B) number for the highest-level parent company located in the United States and, if one exists, for the highest-level foreign-based parent company. A submitter under this part must obtain a D\u0026B number for the parent company if none exists and must report using the standardized conventions for the naming of a parent company as provided in the CDR Instructions for Reporting identified in § 711.35.\n(ii) The name of a person who will serve as technical contact for the submitter company who will be able to answer questions about the information submitted by the company to EPA, and that technical contact person's full mailing address, telephone number, and email address.\n(iii) The legal name and full street address of each site. A submitter under this part must include the appropriate D\u0026B number for each site reported, and the county or parish (or other jurisdictional indicator) in which the site is located. A submitter under this part must obtain a D\u0026B number for the site reported if none exists. For a co-manufacturing situation in which the contracting company initiates the report, the contracting company must report both the site controlling the contract and the producing company's site information.\n(iv) The six-digit NAICS code for the site. A submitter under this part must include the appropriate six-digit NAICS code for each site reported.\n(3) Chemical-specific information. The following chemical-specific information must be reported for each reportable chemical substance manufactured (including imported) above the applicable production volume threshold, as described in paragraph (b) of this section:\n(i) The specific, currently correct CA Index name as used to list the chemical substance on the TSCA Inventory and the correct corresponding CASRN for each reportable chemical substance at each site. Submitters who wish to report chemical substances listed on the confidential portion of the TSCA Inventory will need to report the chemical substance using the corresponding TSCA Accession Number that is listed on the public portion of the Inventory. In addition to reporting the chemical identifying number itself, submitters must specify the type of number they are reporting by selecting from among the codes in Table 1 to paragraph (b)(3)(i).\nTable 1 to Paragraph (b)(3)(i)—Codes To Specify Type of Chemical Identifying Number\nCode Number type\nA TSCA Accession Number.\nC Chemical Abstracts Service Registry Number (CASRN).\n(A) If an importer submitting a report cannot provide the information specified in this paragraph (b)(3)(i) because it is unknown to the importer and claimed as confidential by the supplier of the chemical substance or mixture, the importer must use e-CDRweb to ask the supplier to provide the correct chemical identity and, in the case of a mixture, the percentage of formulation and chemical function information directly to EPA in a joint submission. Such request must include instructions for submitting chemical identity information electronically, using e-CDRweb and CDX (see § 711.35), and for clearly referencing the importer's submission. Contact information for the supplier, a trade name or other designation for the chemical substance or mixture, and a copy of the request to the supplier must be included with the importer's submission.\n(B) If a manufacturer submitting a report cannot provide the information specified in this paragraph (b)(3)(i) because the reportable chemical substance is manufactured using a reactant having a specific chemical identity that is unknown to the manufacturer and claimed as confidential by its supplier, the manufacturer must use e-CDRweb to ask the supplier of the confidential reactant to provide the correct chemical identity of the confidential reactant directly to EPA in a joint submission. Such request must include instructions for submitting chemical identity information electronically using e-CDRweb and CDX (see § 711.35), and for clearly referencing the manufacturer's submission. Contact information for the supplier, a trade name or other designation for the chemical substance, and a copy of the request to the supplier must be included with the importer's submission.\n(C) EPA will accept only joint submissions that are submitted electronically using e-CDRweb and CDX (see § 711.35) and that clearly reference the primary submission to which they refer.\n(ii) For the principal reporting year only, a statement indicating, for each reportable chemical substance at each site, whether the chemical substance is manufactured in the United States, imported into the United States, or both manufactured in the United States and imported into the United States.\n(iii) For the principal reporting year only, the total annual volume (in pounds) of each reportable chemical substance domestically manufactured or imported at each site. The total annual domestically manufactured volume (not including imported volume) and the total annual imported volume must be separately reported. These amounts must be reported to two significant figures of accuracy. In addition, the total annual volume (domestically manufactured plus imported volumes in pounds) of each reportable chemical substance at each site for each complete calendar year since the last principal reporting year.\n(iv) For the principal reporting year only, the volume used on site and the volume directly exported of each reportable chemical substance domestically manufactured or imported at each site. These amounts must be reported to two significant figures of accuracy.\n(v) For the principal reporting year only, a designation indicating, for each imported reportable chemical substance at each site, whether the imported chemical substance is physically present at the reporting site.\n(vi) For the principal reporting year only, a designation indicating, for each reportable chemical substance at each site, whether the chemical substance is being recycled or otherwise used for a commercial purpose instead of being disposed of as a waste or included in a waste stream.\n(vii) For the principal reporting year only, the total number of workers reasonably likely to be exposed to each reportable chemical substance at each site. For each reportable chemical substance at each site, the submitter must select from among the ranges of workers listed in Table 2 to paragraph (b)(3)(vii) and report the corresponding code (i.e., W1 through W8):\nTable 2 to Paragraph (b)(3)(vii)—Codes for Reporting Number of Workers Reasonably Likely To Be Exposed\nCode Range\nW1 Fewer than 10 workers.\nW2 At least 10 but fewer than 25 workers.\nW3 At least 25 but fewer than 50 workers.\nW4 At least 50 but fewer than 100 workers.\nW5 At least 100 but fewer than 500 workers.\nW6 At least 500 but fewer than 1,000 workers.\nW7 At least 1,000 but fewer than 10,000 workers.\nW8 At least 10,000 workers.\n(viii) For the principal reporting year only, the maximum concentration, measured by percentage of weight, of each reportable chemical substance at the time it is sent off-site from each site. If the chemical substance is site-limited, you must report the maximum concentration, measured by percentage of weight of the reportable chemical substance at the time it is reacted on-site to produce a different chemical substance. This information must be reported regardless of the physical form(s) in which the chemical substance is sent off-site/reacted on-site. For each chemical substance at each site, select the maximum concentration of the chemical substance from among the ranges listed in Table 3 to paragraph (b)(3)(viii) and report the corresponding code (i.e., M1 through M5):\nTable 3 to Paragraph (b)(3)(viii)—Codes for Reporting Maximum Concentration of Chemical Substance\nCode Concentration range (percent weight)\nM1 Less than 1 percent by weight.\nM2 At least 1 but less than 30 percent by weight.\nM3 At least 30 but less than 60 percent by weight.\nM4 At least 60 but less than 90 percent by weight.\nM5 At least 90 percent by weight.\n(ix) For the principal reporting year only, the physical form(s) of the reportable chemical substance as it is sent off-site from each site. If the chemical substance is site-limited, you must report the physical form(s) of the reportable chemical substance at the time it is reacted on-site to produce a different chemical substance. For each chemical substance at each site, the submitter must report as many physical forms as applicable from among the physical forms listed in this Unit:\n(A) Dry powder.\n(B) Pellets or large crystals.\n(C) Water- or solvent-wet solid.\n(D) Other solid.\n(E) Gas or vapor.\n(F) Liquid.\n(x) For the principal reporting year only, submitters must report the percentage, rounded off to the closest 10 percent, of total production volume of the reportable chemical substance, reported in response to paragraph (b)(3)(iii) of this section, that is associated with each physical form reported under paragraph (b)(3)(ix) of this section.\n(4) Chemical-specific information related to processing and use. The following chemical-specific information must be reported for each reportable chemical substance manufactured (including imported) above the applicable production volume threshold, as described in this section. Persons subject to paragraph (b)(4) of this section must report the information described in paragraphs (b)(4)(i) and (ii) of this section for each reportable chemical substance at sites under their control and at sites that receive a reportable chemical substance from the submitter directly or indirectly (including through a broker/distributor, from a customer of the submitter, etc.). Information reported in response to this paragraph must be reported for the principal reporting year only and only to the extent that it is known to or reasonably ascertainable by the submitter. Information required to be reported under this paragraph is limited to domestic (i.e., within the customs territory of the United States) processing and use activities. If information responsive to a given data requirement under this paragraph, including information in the form of an estimate, is not known or reasonably ascertainable, the submitter is not required to respond to the requirement.\n(i) Industrial processing and use information. (A) A designation indicating the type of industrial processing or use operation(s) at each site that receives a reportable chemical substance from the submitter site directly or indirectly (whether the recipient site(s) are controlled by the submitter site or not). For each chemical substance, report the letters which correspond to the appropriate processing or use operation(s) listed in Table 4 to paragraph (b)(4)(i)(A). A particular designation may need to be reported more than once, to the extent that a submitter reports more than one sector (under paragraph (b)(4)(i)(B) of this section) that applies to a given designation under this paragraph.\nTable 4 to Paragraph (b)(4)(i)(A)—Codes for Reporting Type of Industrial Processing or Use Operation\nDesignation Operation\nPC Processing as a reactant.\nPF Processing—incorporation into formulation, mixture, or reaction product.\nPA Processing—incorporation into article.\nPK Processing—repackaging.\nU Use—non-incorporative activities.\n(B) A code indicating the sector(s) that best describe the industrial activities associated with each industrial processing or use operation reported under paragraph (b)(4)(i)(A) of this section. For each chemical substance, report the code that corresponds to the appropriate sector(s) listed in Table 5 to paragraph (b)(4)(i)(B). A particular sector code may need to be reported more than once, to the extent that a submitter reports more than one function code (under paragraph (b)(4)(i)(C) of this section) that applies to a given sector code under this paragraph.\nTable 5 to Paragraph (b)(4)(i)(B)—Codes for Reporting Industrial Sectors\nCode Sector description\nIS1 Agriculture, forestry, fishing, and hunting.\nIS2 Oil and gas drilling, extraction, and support activities.\nIS3 Mining (except oil and gas) and support activities.\nIS4 Utilities.\nIS5 Construction.\nIS6 Food, beverage, and tobacco product manufacturing.\nIS7 Textiles, apparel, and leather manufacturing.\nIS8 Wood product manufacturing.\nIS9 Paper manufacturing.\nIS10 Printing and related support activities.\nIS11 Petroleum refineries.\nIS12 Asphalt paving, roofing, and coating materials manufacturing.\nIS13 Petroleum lubricating oil and grease manufacturing.\nIS14 All other petroleum and coal products manufacturing.\nIS15 Petrochemical manufacturing.\nIS16 Industrial gas manufacturing.\nIS17 Synthetic dye and pigment manufacturing.\nIS18 Carbon black manufacturing.\nIS19 All other basic inorganic chemical manufacturing.\nIS20 Cyclic crude and intermediate manufacturing.\nIS21 All other basic organic chemical manufacturing.\nIS22 Plastics material and resin manufacturing.\nIS23 Synthetic rubber manufacturing.\nIS24 Organic fiber manufacturing.\nIS25 Pesticide, fertilizer, and other agricultural chemical manufacturing.\nIS26 Pharmaceutical and medicine manufacturing.\nIS27 Paint and coating manufacturing.\nIS28 Adhesive manufacturing.\nIS29 Soap, cleaning compound, and toilet preparation manufacturing.\nIS30 Printing ink manufacturing.\nIS31 Explosives manufacturing.\nIS32 Custom compounding of purchased resins.\nIS33 Photographic film, paper, plate, and chemical manufacturing.\nIS34 All other chemical product and preparation manufacturing.\nIS35 Plastics product manufacturing.\nIS36 Rubber product manufacturing.\nIS37 Non-metallic mineral product manufacturing (includes cement, clay, concrete, glass, gypsum, lime, and other non-metallic mineral product manufacturing).\nIS38 Primary metal manufacturing.\nIS39 Fabricated metal product manufacturing.\nIS40 Machinery manufacturing.\nIS41 Computer and electronic product manufacturing.\nIS42 Electrical equipment, appliance, and component manufacturing.\nIS43 Transportation equipment manufacturing.\nIS44 Furniture and related product manufacturing.\nIS45 Miscellaneous manufacturing.\nIS46 Wholesale and retail trade.\nIS47 Services.\nIS48 Other (requires additional information).\n(C) For each sector reported under paragraph (b)(4)(i)(B) of this section, the applicable code(s) from Table 6 to paragraph (b)(4)(i)(C) must be selected to designate the function category(ies) that best represents the specific manner in which the chemical substance is used. For the 2020 submission period:\n(1) Use column A in Table 6 to paragraph (b)(4)(i)(C) for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C)); and\n(2) Use either column A or B in Table 6 to paragraph (b)(4)(i)(C) for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C). For the 2024 and future submission periods, use only column A in Table 6 to paragraph (b)(4)(i)(C). A particular function category may need to be reported more than once, to the extent that a submitter reports more than one industrial processing or use operation/sector combination (under paragraphs (b)(4)(i)(A) and (B) of this section) that applies to a given function category under this paragraph. If more than 10 unique combinations of industrial processing or use operations/sector/function categories apply to a chemical substance, submitters need only report the 10 unique combinations for the chemical substance that cumulatively represent the largest percentage of the submitter's production volume for that chemical substance, measured by weight. If none of the listed function categories accurately describes a use of a chemical substance, the category “Other” may be used, and must include a description of the use.\nTable 6 to Paragraph (b)(4)(i)(C)—Codes for Reporting Function Categories\nColumn A Column B\nCode Category Code Category\nF001 Abrasives U001 Abrasives.\nF002 Etching agent\nF003 Adhesion/cohesion promoter U002 Adhesives and sealant chemicals.\nF004 Binder\nF005 Flux agent\nF006 Sealant (barrier)\nF007 Absorbent U003 Adsorbents and absorbents.\nF008 Adsorbent\nF009 Dehydrating agent (desiccant)\nF010 Drier\nF011 Humectant\nF012 Soil amendments (fertilizers) U004 Agricultural chemicals (non-pesticidal).\nF013 Anti-adhesive/cohesive U005 Anti-adhesive agents.\nF014 Dusting agent\nF015 Bleaching agent U006 Bleaching agents.\nF016 Brightener\nF017 Anti-scaling agent U007 Corrosion inhibitors and anti-scaling agents.\nF018 Corrosion inhibitor\nF019 Dye U008 Dyes.\nF020 Fixing agent (mordant)\nF021 Hardener U009 Fillers.\nF022 Filler\nF023 Anti-static agent U010 Finishing agents.\nF024 Softener and conditioner\nF025 Swelling agent\nF026 Tanning agents not otherwise specified\nF027 Waterproofing agent\nF028 Wrinkle resisting agent\nF029 Flame retardant U011 Flame retardants.\nF030 Fuel agents U012 Fuels and fuel additives.\nF031 Fuel\nF032 Heat transferring agent U013 Functional fluids (closed systems).\nF033 Hydraulic fluids\nF034 Insulators\nF035 Refrigerants\nF036 Anti-freeze agent U014 Functional fluids (open systems).\nF037 Intermediate U015 Intermediates.\nF038 Monomers\nF039 Ion exchange agent U016 Ion exchange agents.\nF040 Anti-slip agent U017 Lubricants and lubricant additives.\nF041 Lubricating agent\nF042 Deodorizer U018 Odor agents.\nF043 Fragrance\nF044 Oxidizing agent U019 Oxidizing/reducing agents.\nF045 Reducing agent\nF046 Photosensitive agent U020 Photosensitive chemicals.\nF047 Photosensitizers\nF048 Semiconductor and photovoltaic agent\nF049 UV stabilizer\nF050 Opacifer U021 Pigments.\nF051 Pigment\nF052 Plasticizer U022 Plasticizers.\nF053 Plating agent U023 Plating agents and surface treating agents.\nF054 Catalyst U024 Process regulators.\nF055 Chain transfer agent\nF056 Chemical reaction regulator\nF057 Crystal growth modifiers (nucleating agents)\nF058 Polymerization promoter\nF059 Terminator/Blocker\nF060 Processing aids, specific to petroleum production U025 Processing aids, specific to petroleum production.\nF061 Antioxidant U026 Processing aids, not otherwise listed.\nF062 Chelating agent\nF063 Defoamer\nF064 pH regulating agent\nF065 Processing aids not otherwise specified\nF066 Energy Releasers (explosives, motive propellant) U027 Propellants and blowing agents.\nF067 Foamant\nF068 Propellants, non-motive (blowing agents)\nF069 Cloud-point depressant U028 Solids separation agents.\nF070 Flocculating agent\nF071 Flotation agent\nF072 Solids separation (precipitating) agent, not otherwise specified\nF073 Cleaning agent U029 Solvents (for cleaning or degreasing).\nF074 Diluent U030 Solvents (which become part of product formulation or mixture).\nF075 Solvent\nF076 Surfactant (surface active agent) U031 Surface active agents.\nF077 Emulsifier\nF078 Thickening agent U032 Viscosity adjustors.\nF079 Viscosity modifiers\nF080 Laboratory chemicals U033 Laboratory chemicals.\nF081 Dispersing agent U034 Paint additives and coating additives not described by other categories.\nF082 Freeze-thaw additive\nF083 Surface modifier\nF084 Wetting agent (non-aqueous)\nF085 Aerating and deaerating agents U999 Other (specify).\nF086 Explosion inhibitor\nF087 Fire extinguishing agent\nF088 Flavoring and nutrient\nF089 Anti-redeposition agent\nF090 Anti-stain agent\nF091 Anti-streaking agent\nF092 Conductive agent\nF093 Incandescent agent\nF094 Magnetic element\nF095 Anti-condensation agent\nF096 Coalescing agent\nF097 Film former\nF098 Demulsifier\nF099 Stabilizing agent\nF100 Alloys\nF101 Density modifier\nF102 Elasticizer\nF103 Flow promoter\nF104 Sizing agent\nF105 Solubility enhancer\nF106 Vapor pressure modifiers\nF107 Embalming agent\nF108 Heat stabilizer\nF109 Preservative\nF110 Anti-caking agent\nF111 Deflocculant\nF112 Dust suppressant\nF113 Impregnation agent\nF114 Leaching agent\nF115 Tracer\nF116 X-ray absorber\nF999 Other\nFor the 2020 submission period: (1) Use column A for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph(b)(4)(i)(C) and (2) use either column A or B for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C).\nFor the 2024 and future submission periods, use only column A.\nTable 7 to Paragraph (b)(4)(i)(C)—CASRNs of Chemical Substances Designated as High Priority for Risk Evaluation Under TSCA Section 6(b) on December 30, 2019\nCASRN Chemical substance\n106-46-7 p-Dichlorobenzene.\n107-06-2 1,2-Dichloroethane.\n156-60-5 trans-1,2-Dichloroethylene.\n95-50-1 o-Dichlorobenzene.\n79-00-5 1,1,2-Trichloroethane.\n78-87-5 1,2-Dichloropropane.\n75-34-3 1,1-Dichloroethane.\n84-74-2 Dibutyl phthalate (DBP) (1,2-Benzene-dicarboxylic acid, 1,2-dibutyl ester).\n85-68-7 Butyl benzyl phthalate (BBP)—1,2-Benzene-dicarboxylic acid, 1-butyl 2(phenylmethyl) ester.\n117-81-7 Di-ethylhexyl phthalate (DEHP)—(1,2-Benzene-dicarboxylic acid, 1,2-bis(2-ethylhexyl) ester).\n84-69-5 Di-isobutyl phthalate (DIBP)—(1,2-Benzene-dicarboxylic acid, 1,2-bis-(2methylpropyl) ester).\n84-61-7 Dicyclohexyl phthalate.\n79-94-7 4,4′-(1-Methylethylidene)bis[2,6-dibromophenol] (TBBPA).\n115-96-8 Tris(2-chloroethyl) phosphate (TCEP).\n115-86-6 Phosphoric acid, triphenyl ester (TPP).\n106-93-4 Ethylene dibromide.\n106-99-0 1,3-Butadiene.\n1222-05-5 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylcyclopental[g]-2-benzopyran (HHCB).\n50-00-0 Formaldehyde.\n85-44-9 Phthalic anhydride.\n(D) The estimated percentage, rounded off to the closest 10 percent, of total production volume of the reportable chemical substance associated with each combination of industrial processing or use operation, sector, and function category. Where a particular combination of industrial processing or use operation, sector, and function category accounts for less than 5 percent of the submitter's site's total production volume of a reportable chemical substance, the percentage must not be rounded off to 0 percent if the production volume attributable to that industrial processing or use operation, sector, and function category combination is 25,000 lb (11,340 kg) or more during the reporting year. Instead, in such a case, submitters must report the percentage, rounded off to the closest 1 percent, of the submitter's site's total production volume of the reportable chemical substance associated with the particular combination of industrial processing or use operation, sector, and function category.\n(E) For each combination of industrial processing or use operation, sector, and function category, the submitter must estimate the number of sites at which each reportable chemical substance is processed or used. For each combination associated with each chemical substance, the submitter must select from among the ranges of sites listed in Table 8 to paragraph (b)(4)(i)(E) and report the corresponding code (i.e., S1 through S7):\nTable 8 to Paragraph (b)(4)(i)(E)—Codes for Reporting Numbers of Sites\nCode Range\nS1 Fewer than 10 sites.\nS2 At least 10 but fewer than 25 sites.\nS3 At least 25 but fewer than 100 sites.\nS4 At least 100 but fewer than 250 sites.\nS5 At least 250 but fewer than 1,000 sites.\nS6 At least 1,000 but fewer than 10,000 sites.\nS7 At least 10,000 sites.\n(F) For each combination of industrial processing or use operation, sector, and function category, the submitter must estimate the number of workers reasonably likely to be exposed to each reportable chemical substance. For each combination associated with each chemical substance, the submitter must select from among the worker ranges listed in paragraph (b)(3)(vii) of this section and report the corresponding code (i.e., W1 though W8).\n(ii) Consumer and commercial use information. (A) Using the applicable codes listed in Table 9 to paragraph (b)(4)(ii)(A), submitters must designate the consumer and commercial product category(ies) that best describe the consumer and commercial products in which each reportable chemical substance is used (whether the recipient site(s) are controlled by the submitter site or not). For the 2020 submission period:\n(1) Use column A in Table 9 to paragraph (b)(4)(ii)(A) for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C); and\n(2) Use either column A or B in Table 9 to paragraph (b)(4)(ii)(A) for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C). For the 2024 and future submission periods, use only column A in Table 9 to paragraph (b)(4)(ii)(A). If more than 10 codes apply to a chemical substance, submitters need only report the 10 codes for the chemical substance that cumulatively represent the largest percentage of the submitter's production volume for that chemical, measured by weight. If none of the listed consumer and commercial product categories accurately describes the consumer and commercial products in which each reportable chemical substance is used, the category “Other” may be used, and must include a description of the use.\nTable 9 to Paragraph (b)(4)(ii)(A)—Codes for Reporting Consumer and Commercial Product Categories\nColumn A Column B\nCode Category Code Category\nChemical Substances in Furnishing, Cleaning, Treatment Care Products\nCC101 Construction and building materials covering large surface areas including stone, plaster, cement, glass and ceramic articles; fabrics, textiles, and apparel C101 Floor coverings.\nCC102 Furniture \u0026 furnishings including plastic articles (soft); leather articles C102 Foam seating and bedding products.\nCC103 Furniture \u0026 furnishings including stone, plaster, cement, glass and ceramic articles; metal articles; or rubber articles C103 Furniture and furnishings not covered elsewhere.\nCC104 Leather conditioner C104 Fabric, textile, and leather products not covered elsewhere.\nCC105 Leather tanning, dye, finishing, impregnation and care products\nCC106 Textile (fabric) dyes\nCC107 Textile finishing and impregnating/surface treatment products\nCC108 All-purpose foam spray cleaner C105 Cleaning and furnishing care products.\nCC109 All-purpose liquid cleaner/polish\nCC110 All-purpose liquid spray cleaner\nCC111 All-purpose waxes and polishes\nCC112 Appliance cleaners\nCC113 Drain and toilet cleaners (liquid)\nCC114 Powder cleaners (floors)\nCC115 Powder cleaners (porcelain)\nCC116 Dishwashing detergent (liquid/gel) C106 Laundry and dishwashing products.\nCC117 Dishwashing detergent (unit dose/granule)\nCC118 Dishwashing detergent liquid (hand-wash)\nCC119 Dry cleaning and associated products\nCC120 Fabric enhancers\nCC121 Laundry detergent (unit-dose/granule)\nCC122 Laundry detergent (liquid)\nCC123 Stain removers\nCC124 Ion exchangers C107 Water treatment products.\nCC125 Liquid water treatment products\nCC126 Solid/Powder water treatment products\nCC127 Liquid body soap C108 Personal care products.\nCC128 Liquid hand soap\nCC129 Solid bar soap\nCC130 Air fresheners for motor vehicles C109 Air care products.\nCC131 Continuous action air fresheners\nCC132 Instant action air fresheners\nCC133 Anti-static spray C110 Apparel and footwear care products.\nCC134 Apparel finishing, and impregnating/surface treatment products\nCC135 Insect repellent treatment\nCC136 Pre-market waxes, stains, and polishes applied to footwear\nCC137 Post-market waxes, and polishes applied to footwear (shoe polish)\nCC138 Waterproofing and water-resistant sprays\nChemical Substances in Construction, Paint, Electrical, and Metal Products\nCC201 Fillers and putties C201 Adhesives and sealants.\nCC202 Hot-melt adhesives\nCC203 One-component caulks\nCC204 Solder\nCC205 Single-component glues and adhesives\nCC206 Two-component caulks\nCC207 Two-component glues and adhesives\nCC208 Adhesive/Caulk removers C202 Paints and coatings.\nCC209 Aerosol spray paints\nCC210 Lacquers, stains, varnishes and floor finishes\nCC211 Paint strippers/removers\nCC212 Powder coatings\nCC213 Radiation curable coatings\nCC214 Solvent-based paint\nCC215 Thinners\nCC216 Water-based paint\nCC217 Construction and building materials covering large surface areas, including wood articles C203 Building/construction materials—wood and engineered wood products.\nCC218 Construction and building materials covering large surface areas, including paper articles; metal articles; stone, plaster, cement, glass and ceramic articles C204 Building/construction materials not covered elsewhere.\nCC219 Machinery, mechanical appliances, electrical/electronic articles C205 Electrical and electronic products.\nCC220 Other machinery, mechanical appliances, electronic/electronic articles\nCC221 Construction and building materials covering large surface areas, including metal articles C206 Metal products not covered elsewhere.\nCC222 Electrical batteries and accumulators C207 Batteries.\nChemical Substances in Packaging, Paper, Plastic, Toys, Hobby Products\nCC990 Non-TSCA use C301 Food packaging.\nCC301 Packaging (excluding food packaging), including paper articles C302 Paper products.\nCC302 Other articles with routine direct contact during normal use, including paper articles\nCC303 Packaging (excluding food packaging), including rubber articles; plastic articles (hard); plastic articles (soft) C303 Plastic and rubber products not covered elsewhere.\nCC304 Other articles with routine direct contact during normal use including rubber articles; plastic articles (hard)\nCC305 Toys intended for children's use (and child dedicated articles), including fabrics, textiles, and apparel; or plastic articles (hard) C304 Toys, playground, and sporting equipment.\nCC306 Adhesives applied at elevated temperatures C305 Arts, crafts, and hobby materials.\nCC307 Cement/concrete\nCC308 Crafting glue\nCC309 Crafting paint (applied to body)\nCC310 Crafting paint (applied to craft)\nCC311 Fixatives and finishing spray coatings\nCC312 Modelling clay\nCC313 Correction fluid/tape C306 Ink, toner, and colorant products.\nCC314 Inks in writing equipment (liquid)\nCC315 Inks used for stamps\nCC316 Toner/Printer cartridge\nCC317 Liquid photographic processing solutions C307 Photographic supplies, film, and photochemicals.\nChemical Substances in Automotive, Fuel, Agriculture, Outdoor Use Products\nCC401 Exterior car washes and soaps C401 Automotive care products.\nCC402 Exterior car waxes, polishes, and coatings\nCC403 Interior car care\nCC404 Touch up auto paint\nCC405 Degreasers C402 Lubricants and greases.\nCC406 Liquid lubricants and greases\nCC407 Paste lubricants and greases\nCC408 Spray lubricants and greases\nCC409 Anti-freeze liquids C403 Anti-freeze and de-icing products.\nCC410 De-icing liquids\nCC411 De-icing solids\nCC412 Lock de-icers/releasers\nCC413 Cooking and heating fuels C404 Fuels and related products.\nCC414 Fuel additives\nCC415 Vehicular or appliance fuels\nCC416 Explosive materials C405 Explosive materials.\nCC417 Agricultural non-pesticidal products C406 Agricultural products (non-pesticidal).\nCC418 Lawn and garden care products C407 Lawn and garden care products.\nChemical Substances in Products not Described by Other Codes\nCC980 Other (specify) C909 Other (specify).\nCC990 Non-TSCA use C980 Non-TSCA use.\nFor the 2020 submission period: (1) Use column A for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C) and (2) use either column A or B for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C).\nFor the 2024 and future submission periods, use only column A.\n(B) For each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section, the applicable code(s) described in paragraph (b)(4)(i)(C) of this section must be selected to designate the function category(ies) that best represents the specific manner in which the chemical substance is used. For the 2020 submission period:\n(1) Use column A in Table 6 to paragraph (b)(4)(i)(C) for chemical substances designated in 2019 as high priority for risk evaluation (those chemicals listed in Table 7 to paragraph (b)(4)(i)(C); and\n(2) Use either column A or B in Table 6 to paragraph (b)(4)(i)(C) for chemical substances not listed in Table 7 to paragraph (b)(4)(i)(C). For the 2024 and future submission periods, use only column A in Table 6 to paragraph (b)(4)(i)(C). A particular function category may need to be reported more than once, to the extent that a submitter reports more than one consumer or commercial product category (under paragraph (b)(4)(ii)(A) of this section) that applies to a given function category under this paragraph. If none of the listed function categories accurately describes a use of a chemical substance, the category “Other” may be used, and must include a description of the use.\n(C) An indication, within each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section, whether the use is a consumer or a commercial use.\n(D) Submitters must determine, within each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section, whether any amount of each reportable chemical substance manufactured (including imported) by the submitter is present in (for example, a plasticizer chemical substance used to make pacifiers) or on (for example, as a component in the paint on a toy) any consumer products intended for use by children age 14 or younger, regardless of the concentration of the chemical substance remaining in or on the product. Submitters must select from the following options: The chemical substance is used in or on any consumer products intended for use by children; the chemical substance is not used in or on any consumer products intended for use by children; or information as to whether the chemical substance is used in or on any consumer products intended for use by children is not known to or reasonably ascertainable by the submitter.\n(E) The estimated percentage, rounded off to the closest 10 percent, of the submitter's site's total production volume of the reportable chemical substance associated with each consumer and commercial product category. Where a particular consumer and commercial product category accounts for less than 5 percent of the total production volume of a reportable chemical substance, the percentage must not be rounded off to 0 percent if the production volume attributable to that commercial and consumer product category is 25,000 lb (11,340 kg) or more during the reporting year. Instead, in such a case, submitters must report the percentage, rounded off to the closest 1 percent, of the submitter's site's total production volume of the reportable chemical substance associated with the particular consumer and commercial product category.\n(F) Where the reportable chemical substance is used in consumer or commercial products, the estimated typical maximum concentration, measured by weight, of the chemical substance in each consumer and commercial product category reported under paragraph (b)(4)(ii)(A) of this section. For each chemical substance in each commercial and consumer product category reported under paragraph (b)(4)(ii)(A) of this section, submitters must select from among the ranges of concentrations listed in Table 3 to paragraph (b)(3)(viii) of this section and report the corresponding code (i.e., M1 through M5).\n(G) Where the reportable chemical substance is used in a commercial product, the submitter must estimate the number of commercial workers reasonably likely to be exposed to each reportable chemical substance. For each combination associated with each substance, the submitter must select from among the worker ranges listed in Table 2 to paragraph (b)(3)(vii) of this section and report the corresponding code (i.e., W1 though W8).","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER R—TOXIC SUBSTANCES CONTROL ACT","PART 711—TSCA CHEMICAL DATA REPORTING REQUIREMENTS"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"5dd86a0bd6e708a456ce4d4daaff9955e64eb245723e674e2c71ab1659af827d","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-711.10","next":"us/40-cfr-711.20"},"notice":"GroundRules: Original legal text. Not legal advice."}