{"data":{"id":"us/40-cfr-table-1-to-subpart-hhh-of-part-62","jurisdiction":"us","citation":"40 CFR Table 1 to Subpart HHH of Part 62","heading":"Table 1 to Subpart HHH of Part 62—Emission Limits for Small Rural, Small, Medium, and Large HMIWI","body":"For the air pollutant You must meet this emissions limit With these units (7 percent oxygen, dry basis) Using this averaging time a And determining compliance using this method b\nHMIWI size\nSmall rural Small Medium Large\nParticulate matter 87 (0.038) 66 (0.029) 46 (0.020) c 34 (0.015) d 25 (0.011) Milligrams per dry standard cubic meter (grains per dry standard cubic foot) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method M 26A or 29 of appendix A-8 of part 60\nCarbon monoxide 20 20 5.5 11 Parts per million by volume 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of appendix A-4 of part 60\nDioxins/furans 240 (100) or 5.1 (2.2) 16 (7.0) or 0.013 (0.0057) 0.85 (0.37) or 0.020 (0.0087) 9.3 (4.1) or 0.054 (0.024) Nanograms per dry standard cubic meter total dioxins/furans (grains per billion dry standard cubic feet) or nanograms per dry standard cubic meter TEQ (grains per billion dry standard cubic feet) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of appendix A-7 of part 60\nHydrogen chloride 810 44 c 15 d 7.7 6.6 Parts per million by volume 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of appendix A-8 of part 60\nSulfur dioxide 55 4.2 4.2 9.0 Parts per million by volume 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of appendix A-4 of part 60\nNitrogen oxides 130 190 190 140 Parts per million by volume 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of appendix A-4 of part 60\nLead 0.50 (0.22) 0.31 (0.14) 0.018 (0.0079) 0.036 (0.016) Milligrams per dry standard cubic meter (grains per thousand dry standard cubic feet) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60\nCadmium 0.11 (0.048) 0.017 (0.0074) 0.013 (0.0057) 0.0092 (0.0040) Milligrams per dry standard cubic meter (grains per thousand dry standard cubic feet) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60\nMercury 0.051 (0.0022) 0.014 (0.0061) 0.025 (0.011) 0.018 (0.0079) Milligrams per dry standard cubic meter (grains per thousand dry standard cubic feet) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of appendix A-8 of part 60\na Except as allowed under §§ 62.14452(o)-(q) for HMIWI equipped with CEMS or continuous automated sampling systems.\nb Does not include CEMS, continuous automated sampling systems, and approved alternative non-EPA test methods allowed under § 62.14452(d) and (m).\nc Limits for those HMIWI for which construction or modification was commenced according to § 62.14400(a)(2)(i).\nd Limits for those HMIWI for which construction or modification was commenced according to § 62.14400(a)(2)(ii).","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 62—APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS","Subpart HHH—Federal Plan Requirements for Hospital/Medical/Infectious Waste Incinerators Constructed On Or Before December 1, 2008"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"7134050119aad501cb309498d2e3c16e2e555965f9c1dcdf220fce250c88438c","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-62.14495","next":"us/40-cfr-table-2-to-subpart-hhh-of-part-62"},"notice":"GroundRules: Original legal text. Not legal advice."}