{"data":{"id":"us/40-cfr-table-2-to-subpart-ggggg-of-part-63","jurisdiction":"us","citation":"40 CFR Table 2 to Subpart GGGGG of Part 63","heading":"Table 2 to Subpart GGGGG of Part 63—Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum HAP Vapor Pressure Less Than 76.6 kPa","body":"If your tank design capacity is . . . And the maximum HAP vapor pressure of the remediation material placed in your tank is . . . Then your tank must use . . .\n1. Less than 38 m3 Less than 76.6 kPa Tank Level 1 controls under § 63.7895(b).\n2. At least 38 m3 but less than 151 m3 Less than 13.1 kPa Tank Level 1 controls under § 63.7895(b).\n3. 151 m3 or greater Less than 0.7 kPa Tank Level 1 controls under § 63.7895(b).\n4. at least 38 m3 but less than 151 m3 13.1 kPa or greater Tank Level 2 controls under § 63.7895(c).\n5. 151 m3 or greater 0.7 kPa or greater Tank Level 2 controls under § 63.7895(c)","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart GGGGG—National Emission Standards for Hazardous Air Pollutants: Site Remediation"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"53dfd05db463d7cd4a197c5bc69447d07e4329310325f5459796d975a1ebd33d","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-table-1-to-subpart-ggggg-of-part-63","next":"us/40-cfr-table-3-to-subpart-ggggg-of-part-63"},"notice":"GroundRules: Original legal text. Not legal advice."}