{"data":{"id":"us/40-cfr-table-2-to-subpart-xxxxxx-of-part-63","jurisdiction":"us","citation":"40 CFR Table 2 to Subpart XXXXXX of Part 63","heading":"Table 2 to Subpart XXXXXX of Part 63—Applicability of General Provisions to Metal Fabrication or Finishing Area Sources","body":"Instructions for Table 2—As required in § 63.11523, “General Provisions Requirements,” you must meet each requirement in the following table that applies to you.\nCitation Subject\n63.11 Applicability.\n63.2 Definitions.\n63.3 Units and abbreviations.\n63.4 Prohibited activities.\n63.5 Construction/reconstruction.\n63.6(a), (b)(1)-(b)(5), (c)(1), (c)(2), (c)(5), (g), (i), (j) Compliance with standards and maintenance requirements.\n63.9(a)-(d) Notification requirements.\n63.10(a), (b) except for (b)(2), (d)(1), (d)(4) Recordkeeping and reporting.\n63.12 State authority and delegations.\n63.13 Addresses of State air pollution control agencies and EPA regional offices.\n63.14 Incorporation by reference.\n63.15 Availability of information and confidentiality.\n63.16 Performance track provisions.\n1 § 63.11514(g), “Am I subject to this subpart?” exempts affected sources from the obligation to obtain title V operating permits.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart XXXXXX—National Emission Standards for Hazardous Air Pollutants Area Source Standards for Nine Metal Fabrication and Finishing Source Categories"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"42646e6235734a8576d6c7c25b84e91a76295cc8c80d0de656ba20718e05758d","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-table-1-to-subpart-xxxxxx-of-part-63","next":"us/40-cfr-63.11524"},"notice":"GroundRules: Original legal text. Not legal advice."}