{"data":{"id":"us/40-cfr-table-3-to-subpart-kkkk-of-part-63","jurisdiction":"us","citation":"40 CFR Table 3 to Subpart KKKK of Part 63","heading":"Table 3 to Subpart KKKK of Part 63—Emission Limits for Affected Sources Using the Control Efficiency/Outlet Concentration Compliance Option","body":"You must comply with the emission limits that apply to your affected source in the following table as required by § 63.3490(d).\nIf you use the control efficiency/outlet concentration option to comply with the emission limitations for any coating operation(s) . . . Then you must comply with one of the following by using an emissions control system to . . .\n1. in a new or reconstructed affected source a. reduce emissions of total HAP, measured as THC (as carbon), a by 97 percent; or b. limit emissions of total HAP, measured as THC (as carbon), a to 20 ppmvd at the control device outlet and use a PTE.\n2. in an existing affected source a. reduce emissions of total HAP, measured as THC (as carbon), a by 95 percent; or b. limit emissions of total HAP, measured as THC (as carbon), a to 20 ppmvd at the control device outlet and use a PTE.\na You may choose to subtract methane from THC as carbon measurements.","path":["Title 40—Protection of Environment","CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY","SUBCHAPTER C—AIR PROGRAMS","PART 63—NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES","Subpart KKKK—National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-40.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:04Z","sha256":"54fabcd4ab21d7d286b9642b48031c808e48e4cdf9d8b3c18693b7a2dbd65391","source_id":"us-cfr","stale":true,"prev":"us/40-cfr-table-2-to-subpart-kkkk-of-part-63","next":"us/40-cfr-table-4-to-subpart-kkkk-of-part-63"},"notice":"GroundRules: Original legal text. Not legal advice."}