{"data":{"id":"us/46-cfr-107.260","jurisdiction":"us","citation":"46 CFR 107.260","heading":"Rated load test for cranes.","body":"(a) To meet the requirements in § 107.231(l), each crane must meet the following rated load test at both the maximum and minimum boom angles usually employed in material transfers over the side of the unit:\nRated load of assembled gear Proof load\nLess than or equal to 20 tons 25 pct in excess.\nGreater than 20 tons but less than or equal to 50 tons 5 tons in excess.\nGreater than 50 tons 10 pct in excess.\n(b) The weight of the hook, hook blocks, slings, rib, and other rigging, except the hoist rope, must be considered part of the load for the rated load test.\n(c) The rated load test must be performed—\n(1) When the crane is installed;\n(2) Each 60 months; and\n(3) After repairs or alterations to any structural component of the crane.","path":["Title 46—Shipping","CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY","SUBCHAPTER I-A—MOBILE OFFSHORE DRILLING UNITS","PART 107—INSPECTION AND CERTIFICATION","Subpart B—Inspection and Certification"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-46.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:22Z","sha256":"129f27af4073ed66e4cc46effd704c01ac75a7fe43a26d417968d8e4089c34e7","source_id":"us-cfr","stale":true,"prev":"us/46-cfr-107.259","next":"us/46-cfr-107.261"},"notice":"GroundRules: Original legal text. Not legal advice."}