{"data":{"id":"us/49-cfr-178.255-14","jurisdiction":"us","citation":"49 CFR 178.255-14","heading":"-14 Marking.","body":"(a) In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:\nManufacturer's name ______________ Serial No.\nDOT specification\nNominal capacity ______________ (gallons)\nTare weight ______________ (pounds)\nDate of manufacture\n(b) [Reserved]","path":["Title 49—Transportation","Subtitle B—Other Regulations Relating to Transportation","CHAPTER I—PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION","SUBCHAPTER C—HAZARDOUS MATERIALS REGULATIONS","PART 178—SPECIFICATIONS FOR PACKAGINGS","Subpart H—Specifications for Portable Tanks"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-49.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:34Z","sha256":"5ff09a3b6fd5cca76c7e4644fff3a829291d63caee69e74196816339d3f52197","source_id":"us-cfr","stale":true,"prev":"us/49-cfr-178.255-13","next":"us/49-cfr-178.255-15"},"notice":"GroundRules: Original legal text. Not legal advice."}