{"data":{"id":"us/49-cfr-192.193","jurisdiction":"us","citation":"49 CFR 192.193","heading":"Valve installation in plastic pipe.","body":"Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve or shutoff is operated, and from any other secondary stresses that might be exerted through the valve or its enclosure.","path":["Title 49—Transportation","Subtitle B—Other Regulations Relating to Transportation","CHAPTER I—PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION","SUBCHAPTER D—PIPELINE SAFETY","PART 192—TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS","Subpart D—Design of Pipeline Components"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-49.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:34Z","sha256":"8a421eda0d024b6c894cb16299966ec9c5ca98f95157f03e9bee3cec033f2655","source_id":"us-cfr","stale":true,"prev":"us/49-cfr-192.191","next":"us/49-cfr-192.195"},"notice":"GroundRules: Original legal text. Not legal advice."}