{"data":{"id":"us/49-cfr-195.118","jurisdiction":"us","citation":"49 CFR 195.118","heading":"Fittings.","body":"(a) Butt-welding type fittings must meet the marking, end preparation, and the bursting strength requirements of ASME/ANSI B16.9 or MSS SP-75 (incorporated by reference, see § 195.3).\n(b) There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting.\n(c) The fitting must be suitable for the intended service and be at least as strong as the pipe and other fittings in the pipeline system to which it is attached.","path":["Title 49—Transportation","Subtitle B—Other Regulations Relating to Transportation","CHAPTER I—PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION","SUBCHAPTER D—PIPELINE SAFETY","PART 195—TRANSPORTATION OF HAZARDOUS LIQUIDS BY PIPELINE","Subpart C—Design Requirements"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-49.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:34Z","sha256":"aa7f8571e47f1f90a4d76761abae41b4c52fc603e19a93f388dd0a616474c25f","source_id":"us-cfr","stale":true,"prev":"us/49-cfr-195.116","next":"us/49-cfr-195.120"},"notice":"GroundRules: Original legal text. Not legal advice."}