{"data":{"id":"us/49-cfr-236.339","jurisdiction":"us","citation":"49 CFR 236.339","heading":"Mechanical locking, maintenance requirements.","body":"Locking and connections shall be maintained so that, when a lever or latch is mechanically locked the following will be prevented:\n(a) Mechanical machine—(1) Latch-operated locking. Raising lever latch block so that bottom thereof is within three-eighths inch of top of quadrant.\n(2) Lever-operated locking. Moving lever latch block more than three-eighths inch on top of quadrant.\n(b) Electromechanical machine—(1) Lever moving in horizontal plant. Moving lever more than five-sixteenths inch when in normal position or more than nine-sixteenths inch when in reverse position.\n(2) Lever moving in arc. Moving lever more than 5 degrees.\n(c) Power machine—(1) Latch-operated locking. Raising lever latch block to that bottom thereof is within seven thirty-seconds inch of top of quadrant.\n(2) Lever moving in horizontal plane. Moving lever more than five-sixteenths inch when in normal position or more than nine-sixteenths inch when in reverse position.\n(3) Lever moving in arc. Moving lever more than 5 degrees.","path":["Title 49—Transportation","Subtitle B—Other Regulations Relating to Transportation","CHAPTER II—FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION","PART 236—RULES, STANDARDS, AND INSTRUCTIONS GOVERNING THE INSTALLATION, INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES","Subpart C—Interlocking"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-49.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:26:34Z","sha256":"7811b2c0b1a07ff6ab9f6525a964ff2a1b1e8bfa14fc41c7b0f05590c7ec74c4","source_id":"us-cfr","stale":true,"prev":"us/49-cfr-236.338","next":"us/49-cfr-236.340"},"notice":"GroundRules: Original legal text. Not legal advice."}