{"data":{"id":"us/7-cfr-29.6127","jurisdiction":"us","citation":"7 CFR 29.6127","heading":"Stripper (C Group).","body":"This group consists of tobacco from which the trash and trashy Farm Fillers have been removed but does not meet the specifications of the Binder group.\nU.S. grades Grade names, minimum specifications, and tolerances\nC1 Fine Quality Stripper. Heavy, ripe, firm, semielastic, normal strength and width, and 16 inches or over in length. Uniformity, 90 percent; injury tolerance, 10 percent.\nC2 Fair Quality Stripper. Heavy, mature, close, inelastic, normal strength, narrow, and 16 inches or over in length. Uniformity, 80 percent. Tolerances: 5 percent crude, 5 percent frozen, and 20 percent injury.\nC3 Low Quality Stripper. Heavy, immature, close, inelastic, weak, and narrow. Uniformity, 70 percent. Tolerances: 10 percent crude, 10 percent frozen, and 30 percent injury.","path":["Title 7—Agriculture","Subtitle B—Regulations of the Department of Agriculture","CHAPTER I—AGRICULTURAL MARKETING SERVICE (STANDARDS, INSPECTIONS, MARKETING PRACTICES), DEPARTMENT OF AGRICULTURE","SUBCHAPTER A—COMMODITY STANDARDS AND CONTAINER REQUIREMENTS","PART 29—TOBACCO INSPECTION","Subpart C—Standards"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-7.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:01Z","sha256":"192f9ee42310a45c2da3faed6a910081e60e0988ddb187956d4e39de52469db4","source_id":"us-cfr","stale":true,"prev":"us/7-cfr-29.6126","next":"us/7-cfr-29.6128"},"notice":"GroundRules: Original legal text. Not legal advice."}