{"data":{"id":"us/7-cfr-51.2113","jurisdiction":"us","citation":"7 CFR 51.2113","heading":"Size requirements.","body":"The size may be specified in terms of range in count of whole almond kernels per ounce or in terms of minimum, or minimum and maximum diameter. When a range in count is specified, the whole kernels shall be fairly uniform in size, and the average count per ounce shall be within the range specified. Doubles and broken kernels shall not be used in determining counts. Count ranges per ounce commonly used are shown below, but other ranges may be specified: Provided, that the kernels are fairly uniform in size.\n16 to 18, inclusive.\n18 to 20, inclusive.\n20 to 22, inclusive.\n22 to 24, inclusive.\n23 to 25, inclusive.\n24 to 26, inclusive.\n26 to 28, inclusive.\n27 to 30, inclusive.\n30 to 34, inclusive.\n34 to 40, inclusive.\n40 to 50, inclusive.\n50 and smaller.","path":["Title 7—Agriculture","Subtitle B—Regulations of the Department of Agriculture","CHAPTER I—AGRICULTURAL MARKETING SERVICE (STANDARDS, INSPECTIONS, MARKETING PRACTICES), DEPARTMENT OF AGRICULTURE","SUBCHAPTER C—REQUIREMENTS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT","PART 51—FRESH FRUITS, VEGETABLES, AND OTHER PRODUCTS (INSPECTION, CERTIFICATION, AND STANDARDS)","Subpart W—United States Standards for Grades of Shelled Almonds"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-7.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:01Z","sha256":"446dd0336d8326a841c649b8da3bc35d5d87931a3ad2fdcef1f81e96451320bb","source_id":"us-cfr","stale":true,"prev":"us/7-cfr-51.2112","next":"us/7-cfr-51.2114"},"notice":"GroundRules: Original legal text. Not legal advice."}