{"data":{"id":"us/7-cfr-58.415","jurisdiction":"us","citation":"7 CFR 58.415","heading":"Starter vats.","body":"Bulk starter vats shall be of stainless steel or equally corrosion resistant metal and should be constructed according to the applicable 3-A Sanitary Standards. New or replacement vats shall be constructed according to the applicable 3-A Sanitary Standards. The vats shall be in good repair, equipped with tight fitting lids and have adequate temperature controls such as valves, indicating and/or recording thermometers.","path":["Title 7—Agriculture","Subtitle B—Regulations of the Department of Agriculture","CHAPTER I—AGRICULTURAL MARKETING SERVICE (STANDARDS, INSPECTIONS, MARKETING PRACTICES), DEPARTMENT OF AGRICULTURE","SUBCHAPTER C—REQUIREMENTS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT","PART 58—GRADING AND INSPECTION, GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS","Subpart B—General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-7.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:01Z","sha256":"6cbea500033e5c3ee1e6f2a0ef69cd23e2cf6861c4700ca8650c61f57042ea2e","source_id":"us-cfr","stale":true,"prev":"us/7-cfr-58.414","next":"us/7-cfr-58.416"},"notice":"GroundRules: Original legal text. Not legal advice."}