{"data":{"id":"us/7-cfr-801.6","jurisdiction":"us","citation":"7 CFR 801.6","heading":"Tolerances for moisture meters.","body":"(a) The maintenance tolerances for Motomco 919 moisture meters used in performing official inspection services shall be:\n(1) Headquarters standard meters:\nMoisture range Tolerance\nDirect comparison Sample exchange\nLow ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat\nMid ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat\nHigh ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat\n(2) All other than Headquarters standard meters:\nMoisture range Tolerance\nDirect comparison Sample exchange\nLow ±0.15 percent moisture, mean deviation from standard moisture meter using Hard Red Winter wheat ±0.20 percent moisture, mean deviation from standard moisture meter using Hard Red Winter wheat\nMid ±0.10 percent moisture, mean deviation from standard moisture meter using Hard Red Winter wheat ±0.15 percent moisture, mean deviation from standard moisture meter using Hard Red Winter wheat\nHigh ±0.15 percent moisture, mean deviation from standard moisture meter using Hard Red Winter wheat ±0.20 percent moisture, mean deviation from standard moisture meter using Hard Red Winter wheat\n(b) The maintenance tolerances for GAC 2100 moisture meters used in performing official inspection services shall be:\n(1) Headquarters standard meters. By direct comparison using mid-range Hard Red Winter wheat, ±0.05% mean deviation for the average of the Headquarters standard moisture meters.\n(2) All other than Headquarters standard meters. By sample exchange using mid-range Hard Red Winter wheat, ±0.15% mean deviation from the standard meter.","path":["Title 7—Agriculture","Subtitle B—Regulations of the Department of Agriculture","CHAPTER VIII—AGRICULTURAL MARKETING SERVICE (FEDERAL GRAIN INSPECTION SERVICE, FAIR TRADE PRACTICES PROGRAM), DEPARTMENT OF AGRICULTURE","SUBCHAPTER A—FEDERAL GRAIN INSPECTION","PART 801—OFFICIAL PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT"],"source_url":"https://www.ecfr.gov/api/versioner/v1/full/2026-08-25/title-7.xml","current_through":"2026-08-25","vintage":"","retrieved_at":"2026-08-27T02:24:01Z","sha256":"49c6f3601ebb865a83734c32381f614861994b3aabb3a198a01590c925c97c44","source_id":"us-cfr","stale":true,"prev":"us/7-cfr-801.5","next":"us/7-cfr-801.7"},"notice":"GroundRules: Original legal text. Not legal advice."}